oemof.solph package¶

Submodules¶

oemof.solph.EnergySystem¶

solph version of oemof.network.energy_system

class oemof.solph.network.energy_system.EnergySystem(**kwargs)[source]¶

Bases: oemof.network.energy_system.EnergySystem

A variant of the class EnergySystem from <oemof.network.network.energy_system.EnergySystem> specially tailored to solph.

In order to work in tandem with solph, instances of this class always use solph.GROUPINGS <oemof.solph.GROUPINGS>. If custom groupings are supplied via the groupings keyword argument, solph.GROUPINGS <oemof.solph.GROUPINGS> is prepended to those.

If you know what you are doing and want to use solph without solph.GROUPINGS <oemof.solph.GROUPINGS>, you can just use EnergySystem <oemof.network.network.energy_system.EnergySystem>` of oemof.network directly.

oemof.solph.Bus¶

solph version of oemof.network.bus

class oemof.solph.network.bus.Bus(*args, **kwargs)[source]¶

Bases: oemof.network.network.Bus

A balance object. Every node has to be connected to Bus.

Notes

The following sets, variables, constraints and objective parts are created

Bus

constraint_group()[source]¶

Creating sets, variables, constraints and parts of the objective function for Bus objects.

class oemof.solph.blocks.bus.Bus(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for all balanced buses.

The following constraints are build:

Bus balance om.Bus.balance[i, o, t]: $\sum_{i \in INPUTS(n)} flow(i, n, t) = \sum_{o \in OUTPUTS(n)} flow(n, o, t), \\ \forall n \in \textrm{BUSES}, \forall t \in \textrm{TIMESTEPS}.$

oemof.solph.Flow¶

solph version of oemof.network.Edge

class oemof.solph.network.flow.Flow(**kwargs)[source]¶

Bases: oemof.network.network.Edge

Defines a flow between two nodes.

Keyword arguments are used to set the attributes of this flow. Parameters which are handled specially are noted below. For the case where a parameter can be either a scalar or an iterable, a scalar value will be converted to a sequence containing the scalar value at every index. This sequence is then stored under the paramter’s key.

Parameters:

nominal_value (numeric, $P_{nom}$ ) – The nominal value of the flow. If this value is set the corresponding optimization variable of the flow object will be bounded by this value multiplied with min(lower bound)/max(upper bound).
max (numeric (iterable or scalar), $f_{max}$ ) – Normed maximum value of the flow. The flow absolute maximum will be calculated by multiplying nominal_value with max
min (numeric (iterable or scalar), $f_{min}$ ) – Normed minimum value of the flow (see max).
fix (numeric (iterable or scalar), $f_{actual}$ ) – Normed fixed value for the flow variable. Will be multiplied with the nominal_value to get the absolute value. If fixed is set to True the flow variable will be fixed to fix * nominal_value, i.e. this value is set exogenous.
positive_gradient (dict, default: {‘ub’: None, ‘costs’: 0}) –

A dictionary containing the following two keys:
- ‘ub’: numeric (iterable, scalar or None), the normed upper bound on the positive difference (flow[t-1] < flow[t]) of two consecutive flow values.
- ‘costs`: numeric (scalar or None), the gradient cost per unit.
negative_gradient (dict, default: {‘ub’: None, ‘costs’: 0}) –

A dictionary containing the following two keys:
- ‘ub’: numeric (iterable, scalar or None), the normed upper bound on the negative difference (flow[t-1] > flow[t]) of two consecutive flow values.
- ‘costs`: numeric (scalar or None), the gradient cost per unit.
summed_max (numeric, $f_{sum,max}$ ) – Specific maximum value summed over all timesteps. Will be multiplied with the nominal_value to get the absolute limit.
summed_min (numeric, $f_{sum,min}$ ) – see above
variable_costs (numeric (iterable or scalar)) – The costs associated with one unit of the flow. If this is set the costs will be added to the objective expression of the optimization problem.
fixed (boolean) – Boolean value indicating if a flow is fixed during the optimization problem to its ex-ante set value. Used in combination with the fix.
investment (Investment) – Object indicating if a nominal_value of the flow is determined by the optimization problem. Note: This will refer all attributes to an investment variable instead of to the nominal_value. The nominal_value should not be set (or set to None) if an investment object is used.
nonconvex (NonConvex) – If a nonconvex flow object is added here, the flow constraints will be altered significantly as the mathematical model for the flow will be different, i.e. constraint etc. from NonConvexFlow will be used instead of Flow. Note: at the moment this does not work if the investment attribute is set .

Notes

The following sets, variables, constraints and objective parts are created

Flow
InvestmentFlow

(additionally if Investment object is present)
NonConvexFlow

(If nonconvex object is present, CAUTION: replaces Flow class and a MILP will be build)

Examples

Creating a fixed flow object:

>>> f = Flow(fix=[10, 4, 4], variable_costs=5)
>>> f.variable_costs[2]
5
>>> f.fix[2]
4

Creating a flow object with time-depended lower and upper bounds:

>>> f1 = Flow(min=[0.2, 0.3], max=0.99, nominal_value=100)
>>> f1.max[1]
0.99

Creating sets, variables, constraints and parts of the objective function for Flow objects.

class oemof.solph.blocks.flow.Flow(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Flow block with definitions for standard flows.

The following variables are created:

negative_gradient :: Difference of a flow in consecutive timesteps if flow is reduced indexed by NEGATIVE_GRADIENT_FLOWS, TIMESTEPS.
positive_gradient :: Difference of a flow in consecutive timesteps if flow is increased indexed by NEGATIVE_GRADIENT_FLOWS, TIMESTEPS.

The following sets are created: (-> see basic sets at Model )

SUMMED_MAX_FLOWS: A set of flows with the attribute summed_max being not None.
SUMMED_MIN_FLOWS: A set of flows with the attribute summed_min being not None.
NEGATIVE_GRADIENT_FLOWS: A set of flows with the attribute negative_gradient being not None.
POSITIVE_GRADIENT_FLOWS: A set of flows with the attribute positive_gradient being not None
INTEGER_FLOWS: A set of flows where the attribute integer is True (forces flow to only take integer values)

The following constraints are build:

Flow max sum om.Flow.summed_max[i, o]

$\sum_t flow(i, o, t) \cdot \tau \leq summed\_max(i, o) \cdot nominal\_value(i, o), \\ \forall (i, o) \in \textrm{SUMMED\_MAX\_FLOWS}.$

Flow min sum om.Flow.summed_min[i, o]

$\sum_t flow(i, o, t) \cdot \tau \geq summed\_min(i, o) \cdot nominal\_value(i, o), \\ \forall (i, o) \in \textrm{SUMMED\_MIN\_FLOWS}.$

Negative gradient constraint

om.Flow.negative_gradient_constr[i, o]:: $flow(i, o, t-1) - flow(i, o, t) \geq \ negative\_gradient(i, o, t), \\ \forall (i, o) \in \textrm{NEGATIVE\_GRADIENT\_FLOWS}, \\ \forall t \in \textrm{TIMESTEPS}.$

Positive gradient constraint

om.Flow.positive_gradient_constr[i, o]:: $flow(i, o, t) - flow(i, o, t-1) \geq \ positive\__gradient(i, o, t), \\ \forall (i, o) \in \textrm{POSITIVE\_GRADIENT\_FLOWS}, \\ \forall t \in \textrm{TIMESTEPS}.$

The following parts of the objective function are created:

If variable_costs are set by the user:: $\sum_{(i,o)} \sum_t flow(i, o, t) \cdot variable\_costs(i, o, t)$

The expression can be accessed by om.Flow.variable_costs and their value after optimization by om.Flow.variable_costs() .

Creating sets, variables, constraints and parts of the objective function for Flow objects with investment option.

class oemof.solph.blocks.investment_flow.InvestmentFlow(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for all flows with Investment being not None.

See oemof.solph.options.Investment for all parameters of the Investment class.

See oemof.solph.network.Flow for all parameters of the Flow class.

Variables

All InvestmentFlow are indexed by a starting and ending node $(i, o)$ , which is omitted in the following for the sake of convenience. The following variables are created:

$P(t)$

Actual flow value (created in oemof.solph.models.BaseModel).
$P_{invest}$

Value of the investment variable, i.e. equivalent to the nominal value of the flows after optimization.
$b_{invest}$

Binary variable for the status of the investment, if nonconvex is True.

Constraints

Depending on the attributes of the InvestmentFlow and Flow, different constraints are created. The following constraint is created for all InvestmentFlow:

Upper bound for the flow value

$P(t) \le ( P_{invest} + P_{exist} ) \cdot f_{max}(t)$

Depeding on the attribute nonconvex, the constraints for the bounds of the decision variable $P_{invest}$ are different:

nonconvex = False

$P_{invest, min} \le P_{invest} \le P_{invest, max}$

nonconvex = True

$& P_{invest, min} \cdot b_{invest} \le P_{invest}\\ & P_{invest} \le P_{invest, max} \cdot b_{invest}\\$

For all InvestmentFlow (independent of the attribute nonconvex), the following additional constraints are created, if the appropriate attribute of the Flow (see oemof.solph.network.Flow) is set:

fix is not None

Actual value constraint for investments with fixed flow values

$P(t) = ( P_{invest} + P_{exist} ) \cdot f_{fix}(t)$

min != 0

Lower bound for the flow values

$P(t) \geq ( P_{invest} + P_{exist} ) \cdot f_{min}(t)$

summed_max is not None

Upper bound for the sum of all flow values (e.g. maximum full load hours)

$\sum_t P(t) \cdot \tau(t) \leq ( P_{invest} + P_{exist} ) \cdot f_{sum, min}$

summed_min is not None

Lower bound for the sum of all flow values (e.g. minimum full load hours)

$\sum_t P(t) \cdot \tau(t) \geq ( P_{invest} + P_{exist} ) \cdot f_{sum, min}$

Objective function

The part of the objective function added by the InvestmentFlow also depends on whether a convex or nonconvex InvestmentFlow is selected. The following parts of the objective function are created:

nonconvex = False

$P_{invest} \cdot c_{invest,var}$

nonconvex = True

$P_{invest} \cdot c_{invest,var} + c_{invest,fix} \cdot b_{invest}\\$

The total value of all costs of all InvestmentFlow can be retrieved calling om.InvestmentFlow.investment_costs.expr().

List of Variables (in csv table syntax)¶
symbol	attribute	explanation
$P(t)$	`flow[n, o, t]`	Actual flow value
$P_{invest}$	`invest[i, o]`	Invested flow capacity
$b_{invest}$	`invest_status[i, o]`	Binary status of investment

List of Variables (in rst table syntax):

symbol	attribute	explanation
$P(t)$	`flow[n, o, t]`	Actual flow value
$P_{invest}$	`invest[i, o]`	Invested flow capacity
$b_{invest}$	`invest_status[i, o]`	Binary status of investment

Grid table style:

symbol	attribute	explanation
$P(t)$	`flow[n, o, t]`	Actual flow value
$P_{invest}$	`invest[i, o]`	Invested flow capacity
$b_{invest}$	`invest_status[i, o]`	Binary status of investment

List of Parameters¶
symbol	attribute	explanation
$P_{exist}$	`flows[i, o].investment.existing`	Existing flow capacity
$P_{invest,min}$	`flows[i, o].investment.minimum`	Minimum investment capacity
$P_{invest,max}$	`flows[i, o].investment.maximum`	Maximum investment capacity
$c_{invest,var}$	`flows[i, o].investment.ep_costs`	Variable investment costs
$c_{invest,fix}$	`flows[i, o].investment.offset`	Fix investment costs
$f_{actual}$	`flows[i, o].fix[t]`	Normed fixed value for the flow variable
$f_{max}$	`flows[i, o].max[t]`	Normed maximum value of the flow
$f_{min}$	`flows[i, o].min[t]`	Normed minimum value of the flow
$f_{sum,max}$	`flows[i, o].summed_max`	Specific maximum of summed flow values (per installed capacity)
$f_{sum,min}$	`flows[i, o].summed_min`	Specific minimum of summed flow values (per installed capacity)
$\tau(t)$	`timeincrement[t]`	Time step width for each time step

Note

In case of a nonconvex investment flow (nonconvex=True), the existing flow capacity $P_{exist}$ needs to be zero. At least, it is not tested yet, whether this works out, or makes any sense at all.

Note

See also oemof.solph.network.Flow, oemof.solph.blocks.Flow and oemof.solph.options.Investment

Creating sets, variables, constraints and parts of the objective function for nonconvex Flow objects.

class oemof.solph.blocks.non_convex_flow.NonConvexFlow(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

The following sets are created: (-> see basic sets at Model )

A set of flows with the attribute nonconvex of type: options.NonConvex.
MIN_FLOWS: A subset of set NONCONVEX_FLOWS with the attribute min being not None in the first timestep.
ACTIVITYCOSTFLOWS: A subset of set NONCONVEX_FLOWS with the attribute activity_costs being not None.
STARTUPFLOWS: A subset of set NONCONVEX_FLOWS with the attribute maximum_startups or startup_costs being not None.
MAXSTARTUPFLOWS: A subset of set STARTUPFLOWS with the attribute maximum_startups being not None.
SHUTDOWNFLOWS: A subset of set NONCONVEX_FLOWS with the attribute maximum_shutdowns or shutdown_costs being not None.
MAXSHUTDOWNFLOWS: A subset of set SHUTDOWNFLOWS with the attribute maximum_shutdowns being not None.
MINUPTIMEFLOWS: A subset of set NONCONVEX_FLOWS with the attribute minimum_uptime being not None.
MINDOWNTIMEFLOWS: A subset of set NONCONVEX_FLOWS with the attribute minimum_downtime being not None.
POSITIVE_GRADIENT_FLOWS: A subset of set NONCONVEX_FLOWS with the attribute positive_gradient being not None.
NEGATIVE_GRADIENT_FLOWS: A subset of set NONCONVEX_FLOWS with the attribute negative_gradient being not None.

The following variables are created:

Status variable (binary) om.NonConvexFlow.status:: Variable indicating if flow is >= 0 indexed by FLOWS
Startup variable (binary) om.NonConvexFlow.startup:: Variable indicating startup of flow (component) indexed by STARTUPFLOWS
Shutdown variable (binary) om.NonConvexFlow.shutdown:: Variable indicating shutdown of flow (component) indexed by SHUTDOWNFLOWS
Positive gradient (continuous) om.NonConvexFlow.positive_gradient:: Variable indicating the positive gradient, i.e. the load increase between two consecutive timesteps, indexed by POSITIVE_GRADIENT_FLOWS
Negative gradient (continuous) om.NonConvexFlow.negative_gradient:: Variable indicating the negative gradient, i.e. the load decrease between two consecutive timesteps, indexed by NEGATIVE_GRADIENT_FLOWS

The following constraints are created:

Minimum flow constraint om.NonConvexFlow.min[i,o,t]

$flow(i, o, t) \geq min(i, o, t) \cdot nominal\_value \ \cdot status(i, o, t), \\ \forall t \in \textrm{TIMESTEPS}, \\ \forall (i, o) \in \textrm{NONCONVEX\_FLOWS}.$

Maximum flow constraint om.NonConvexFlow.max[i,o,t]

$flow(i, o, t) \leq max(i, o, t) \cdot nominal\_value \ \cdot status(i, o, t), \\ \forall t \in \textrm{TIMESTEPS}, \\ \forall (i, o) \in \textrm{NONCONVEX\_FLOWS}.$

Startup constraint om.NonConvexFlow.startup_constr[i,o,t]

$startup(i, o, t) \geq \ status(i,o,t) - status(i, o, t-1) \\ \forall t \in \textrm{TIMESTEPS}, \\ \forall (i,o) \in \textrm{STARTUPFLOWS}.$

Maximum startups constraint

om.NonConvexFlow.max_startup_constr[i,o,t]: $\sum_{t \in \textrm{TIMESTEPS}} startup(i, o, t) \leq \ N_{start}(i,o) \forall (i,o) \in \textrm{MAXSTARTUPFLOWS}.$

Shutdown constraint om.NonConvexFlow.shutdown_constr[i,o,t]

$shutdown(i, o, t) \geq \ status(i, o, t-1) - status(i, o, t) \\ \forall t \in \textrm{TIMESTEPS}, \\ \forall (i, o) \in \textrm{SHUTDOWNFLOWS}.$

Maximum shutdowns constraint

om.NonConvexFlow.max_startup_constr[i,o,t]: $\sum_{t \in \textrm{TIMESTEPS}} startup(i, o, t) \leq \ N_{shutdown}(i,o) \forall (i,o) \in \textrm{MAXSHUTDOWNFLOWS}.$

Minimum uptime constraint om.NonConvexFlow.uptime_constr[i,o,t]

$(status(i, o, t)-status(i, o, t-1)) \cdot minimum\_uptime(i, o) \\ \leq \sum_{n=0}^{minimum\_uptime-1} status(i,o,t+n) \\ \forall t \in \textrm{TIMESTEPS} | \\ t \neq \{0..minimum\_uptime\} \cup \ \{t\_max-minimum\_uptime..t\_max\} , \\ \forall (i,o) \in \textrm{MINUPTIMEFLOWS}. \\ \\ status(i, o, t) = initial\_status(i, o) \\ \forall t \in \textrm{TIMESTEPS} | \\ t = \{0..minimum\_uptime\} \cup \ \{t\_max-minimum\_uptime..t\_max\} , \\ \forall (i,o) \in \textrm{MINUPTIMEFLOWS}.$

Minimum downtime constraint om.NonConvexFlow.downtime_constr[i,o,t]

$(status(i, o, t-1)-status(i, o, t)) \ \cdot minimum\_downtime(i, o) \\ \leq minimum\_downtime(i, o) \ - \sum_{n=0}^{minimum\_downtime-1} status(i,o,t+n) \\ \forall t \in \textrm{TIMESTEPS} | \\ t \neq \{0..minimum\_downtime\} \cup \ \{t\_max-minimum\_downtime..t\_max\} , \\ \forall (i,o) \in \textrm{MINDOWNTIMEFLOWS}. \\ \\ status(i, o, t) = initial\_status(i, o) \\ \forall t \in \textrm{TIMESTEPS} | \\ t = \{0..minimum\_downtime\} \cup \ \{t\_max-minimum\_downtime..t\_max\} , \\ \forall (i,o) \in \textrm{MINDOWNTIMEFLOWS}.$

Positive gradient constraint

om.NonConvexFlow.positive_gradient_constr[i, o]:

$flow(i, o, t) \cdot status(i, o, t)$

flow(i, o, t-1) cdot status(i, o, t-1) geq positive_gradient(i, o, t), \ forall (i, o) in textrm{POSITIVE_GRADIENT_FLOWS}, \ forall t in textrm{TIMESTEPS}.

Negative gradient constraint

om.NonConvexFlow.negative_gradient_constr[i, o]:: $flow(i, o, t-1) \cdot status(i, o, t-1) - flow(i, o, t) \cdot status(i, o, t) \geq \ negative\_gradient(i, o, t), \\ \forall (i, o) \in \textrm{NEGATIVE\_GRADIENT\_FLOWS}, \\ \forall t \in \textrm{TIMESTEPS}.$

The following parts of the objective function are created:

If nonconvex.startup_costs is set by the user:: $\sum_{i, o \in STARTUPFLOWS} \sum_t startup(i, o, t) \ \cdot startup\_costs(i, o)$
If nonconvex.shutdown_costs is set by the user:: $\sum_{i, o \in SHUTDOWNFLOWS} \sum_t shutdown(i, o, t) \ \cdot shutdown\_costs(i, o)$
If nonconvex.activity_costs is set by the user:: $\sum_{i, o \in ACTIVITYCOSTFLOWS} \sum_t status(i, o, t) \ \cdot activity\_costs(i, o)$
If nonconvex.positive_gradient[“costs”] is set by the user:: $\sum_{i, o \in POSITIVE_GRADIENT_FLOWS} \sum_t positive_gradient(i, o, t) \cdot positive\_gradient\_costs(i, o)$
If nonconvex.negative_gradient[“costs”] is set by the user:: $\sum_{i, o \in NEGATIVE_GRADIENT_FLOWS} \sum_t negative_gradient(i, o, t) \cdot negative\_gradient\_costs(i, o)$

oemof.solph.Sink¶

solph version of oemof.network.Sink

class oemof.solph.network.sink.Sink(*args, **kwargs)[source]¶

Bases: oemof.network.network.Sink

An object with one input flow.

constraint_group()[source]¶

oemof.solph.Source¶

solph version of oemof.network.Source

class oemof.solph.network.source.Source(*args, **kwargs)[source]¶

Bases: oemof.network.network.Source

An object with one output flow.

constraint_group()[source]¶

oemof.solph.Transformer¶

solph version of oemof.network.Transformer

class oemof.solph.network.transformer.Transformer(*args, **kwargs)[source]¶

Bases: oemof.network.network.Transformer

A linear Transformer object with n inputs and n outputs.

Parameters:	conversion_factors (dict) – Dictionary containing conversion factors for conversion of each flow. Keys are the connected bus objects. The dictionary values can either be a scalar or an iterable with length of time horizon for simulation.

Examples

Defining an linear transformer:

>>> from oemof import solph
>>> bgas = solph.Bus(label='natural_gas')
>>> bcoal = solph.Bus(label='hard_coal')
>>> bel = solph.Bus(label='electricity')
>>> bheat = solph.Bus(label='heat')

>>> trsf = solph.Transformer(
...    label='pp_gas_1',
...    inputs={bgas: solph.Flow(), bcoal: solph.Flow()},
...    outputs={bel: solph.Flow(), bheat: solph.Flow()},
...    conversion_factors={bel: 0.3, bheat: 0.5,
...                        bgas: 0.8, bcoal: 0.2})
>>> print(sorted([x[1][5] for x in trsf.conversion_factors.items()]))
[0.2, 0.3, 0.5, 0.8]

>>> type(trsf)
<class 'oemof.solph.network.transformer.Transformer'>

>>> sorted([str(i) for i in trsf.inputs])
['hard_coal', 'natural_gas']

>>> trsf_new = solph.Transformer(
...    label='pp_gas_2',
...    inputs={bgas: solph.Flow()},
...    outputs={bel: solph.Flow(), bheat: solph.Flow()},
...    conversion_factors={bel: 0.3, bheat: 0.5})
>>> trsf_new.conversion_factors[bgas][3]
1

Notes

The following sets, variables, constraints and objective parts are created

Transformer

constraint_group()[source]¶

Creating sets, variables, constraints and parts of the objective function for Transformer objects.

class oemof.solph.blocks.transformer.Transformer(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the linear relation of nodes with type Transformer

The following sets are created: (-> see basic sets at Model )

TRANSFORMERS: A set with all Transformer objects.

The following constraints are created:

Linear relation om.Transformer.relation[i,o,t]: $\P_{i,n}(t) \times \eta_{n,o}(t) = \ \P_{n,o}(t) \times \eta_{n,i}(t), \\ \forall t \in \textrm{TIMESTEPS}, \\ \forall n \in \textrm{TRANSFORMERS}, \\ \forall i \in \textrm{INPUTS(n)}, \\ \forall o \in \textrm{OUTPUTS(n)},$

symbol	attribute	explanation
$P_{i,n}(t)$	flow[i, n, t]	Transformer inflow
$P_{n,o}(t)$	flow[n, o, t]	Transformer outflow
$\eta_{i,n}(t)$	conversion_factor[i, n, t]	Conversion efficiency

oemof.solph.components.ExtractionTurbineCHP¶

ExtractionTurbineCHP and associated individual constraints (blocks) and groupings.

class oemof.solph.components.extraction_turbine_chp.ExtractionTurbineCHP(conversion_factor_full_condensation, *args, **kwargs)[source]¶

Bases: oemof.solph.network.transformer.Transformer

A CHP with an extraction turbine in a linear model. For more options see the GenericCHP class.

One main output flow has to be defined and is tapped by the remaining flow. The conversion factors have to be defined for the maximum tapped flow ( full CHP mode) and for no tapped flow (full condensing mode). Even though it is possible to limit the variability of the tapped flow, so that the full condensing mode will never be reached.

Parameters:

conversion_factors (dict) – Dictionary containing conversion factors for conversion of inflow to specified outflow. Keys are output bus objects. The dictionary values can either be a scalar or a sequence with length of time horizon for simulation.
conversion_factor_full_condensation (dict) – The efficiency of the main flow if there is no tapped flow. Only one key is allowed. Use one of the keys of the conversion factors. The key indicates the main flow. The other output flow is the tapped flow.

Notes

The following sets, variables, constraints and objective parts are created

ExtractionTurbineCHPBlock

Examples

>>> from oemof import solph
>>> bel = solph.Bus(label='electricityBus')
>>> bth = solph.Bus(label='heatBus')
>>> bgas = solph.Bus(label='commodityBus')
>>> et_chp = solph.components.ExtractionTurbineCHP(
...    label='variable_chp_gas',
...    inputs={bgas: solph.Flow(nominal_value=10e10)},
...    outputs={bel: solph.Flow(), bth: solph.Flow()},
...    conversion_factors={bel: 0.3, bth: 0.5},
...    conversion_factor_full_condensation={bel: 0.5})

constraint_group()[source]¶

class oemof.solph.components.extraction_turbine_chp.ExtractionTurbineCHPBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the linear relation of nodes with type ExtractionTurbineCHP

The following two constraints are created:

$& (1)\dot H_{Fuel}(t) = \frac{P_{el}(t) + \dot Q_{th}(t) \cdot \beta(t)} {\eta_{el,woExtr}(t)} \\ & (2)P_{el}(t) \geq \dot Q_{th}(t) \cdot C_b = \dot Q_{th}(t) \cdot \frac{\eta_{el,maxExtr}(t)} {\eta_{th,maxExtr}(t)}$

where $\beta$ is defined as:

$\beta(t) = \frac{\eta_{el,woExtr}(t) - \eta_{el,maxExtr}(t)}{\eta_{th,maxExtr}(t)}$

where the first equation is the result of the relation between the input flow and the two output flows, the second equation stems from how the two output flows relate to each other, and the symbols used are defined as follows (with Variables (V) and Parameters (P)):

symbol	attribute	type	explanation
$\dot H_{Fuel}$	flow[i, n, t]	V	fuel input flow
$P_{el}$	flow[n, main_output, t]	V	electric power
$\dot Q_{th}$	flow[n, tapped_output, t]	V	thermal output
$\beta$	main_flow_loss_index[n, t]	P	power loss index
$\eta_{el,woExtr}$	conversion_factor_full_condensation[n, t]	P	electric efficiency without heat extraction
$\eta_{el,maxExtr}$	conversion_factors[main_output][n, t]	P	electric efficiency with max heat extraction
$\eta_{th,maxExtr}$	conversion_factors[tapped_output][n, t]	P	thermal efficiency with maximal heat extraction

CONSTRAINT_GROUP = True¶

oemof.solph.components.GenericCHP¶

GenericCHP and associated individual constraints (blocks) and groupings.

class oemof.solph.components.generic_chp.GenericCHP(*args, **kwargs)[source]¶

Bases: oemof.network.network.Transformer

Component GenericCHP to model combined heat and power plants.

Can be used to model (combined cycle) extraction or back-pressure turbines and used a mixed-integer linear formulation. Thus, it induces more computational effort than the ExtractionTurbineCHP for the benefit of higher accuracy.

The full set of equations is described in: Mollenhauer, E., Christidis, A. & Tsatsaronis, G. Evaluation of an energy- and exergy-based generic modeling approach of combined heat and power plants Int J Energy Environ Eng (2016) 7: 167. https://doi.org/10.1007/s40095-016-0204-6

For a general understanding of (MI)LP CHP representation, see: Fabricio I. Salgado, P. Short - Term Operation Planning on Cogeneration Systems: A Survey Electric Power Systems Research (2007) Electric Power Systems Research Volume 78, Issue 5, May 2008, Pages 835-848 https://doi.org/10.1016/j.epsr.2007.06.001

Note

An adaption for the flow parameter H_L_FG_share_max has been made to set the flue gas losses at maximum heat extraction H_L_FG_max as share of the fuel flow H_F e.g. for combined cycle extraction turbines. The flow parameter H_L_FG_share_min can be used to set the flue gas losses at minimum heat extraction H_L_FG_min as share of the fuel flow H_F e.g. for motoric CHPs. The boolean component parameter back_pressure can be set to model back-pressure characteristics.

Also have a look at the examples on how to use it.

Parameters:

fuel_input (dict) – Dictionary with key-value-pair of oemof.Bus and oemof.Flow object for the fuel input.
electrical_output (dict) – Dictionary with key-value-pair of oemof.Bus and oemof.Flow object for the electrical output. Related parameters like P_max_woDH are passed as attributes of the oemof.Flow object.
heat_output (dict) – Dictionary with key-value-pair of oemof.Bus and oemof.Flow object for the heat output. Related parameters like Q_CW_min are passed as attributes of the oemof.Flow object.
Beta (list of numerical values) – Beta values in same dimension as all other parameters (length of optimization period).
back_pressure (boolean) – Flag to use back-pressure characteristics. Set to True and Q_CW_min to zero for back-pressure turbines. See paper above for more information.

Note

The following sets, variables, constraints and objective parts are created

GenericCHPBlock

Examples

>>> from oemof import solph
>>> bel = solph.Bus(label='electricityBus')
>>> bth = solph.Bus(label='heatBus')
>>> bgas = solph.Bus(label='commodityBus')
>>> ccet = solph.components.GenericCHP(
...    label='combined_cycle_extraction_turbine',
...    fuel_input={bgas: solph.Flow(
...        H_L_FG_share_max=[0.183])},
...    electrical_output={bel: solph.Flow(
...        P_max_woDH=[155.946],
...        P_min_woDH=[68.787],
...        Eta_el_max_woDH=[0.525],
...        Eta_el_min_woDH=[0.444])},
...    heat_output={bth: solph.Flow(
...        Q_CW_min=[10.552])},
...    Beta=[0.122], back_pressure=False)
>>> type(ccet)
<class 'oemof.solph.components.generic_chp.GenericCHP'>

alphas¶: Compute or return the _alphas attribute.

constraint_group()[source]¶

class oemof.solph.components.generic_chp.GenericCHPBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the relation of the $n$ nodes with type class:.GenericCHP.

The following constraints are created:

$& (1)\qquad \dot{H}_F(t) = fuel\ input \\ & (2)\qquad \dot{Q}(t) = heat\ output \\ & (3)\qquad P_{el}(t) = power\ output\\ & (4)\qquad \dot{H}_F(t) = \alpha_0(t) \cdot Y(t) + \alpha_1(t) \cdot P_{el,woDH}(t)\\ & (5)\qquad \dot{H}_F(t) = \alpha_0(t) \cdot Y(t) + \alpha_1(t) \cdot ( P_{el}(t) + \beta \cdot \dot{Q}(t) )\\ & (6)\qquad \dot{H}_F(t) \leq Y(t) \cdot \frac{P_{el, max, woDH}(t)}{\eta_{el,max,woDH}(t)}\\ & (7)\qquad \dot{H}_F(t) \geq Y(t) \cdot \frac{P_{el, min, woDH}(t)}{\eta_{el,min,woDH}(t)}\\ & (8)\qquad \dot{H}_{L,FG,max}(t) = \dot{H}_F(t) \cdot \dot{H}_{L,FG,sharemax}(t)\\ & (9)\qquad \dot{H}_{L,FG,min}(t) = \dot{H}_F(t) \cdot \dot{H}_{L,FG,sharemin}(t)\\ & (10)\qquad P_{el}(t) + \dot{Q}(t) + \dot{H}_{L,FG,max}(t) + \dot{Q}_{CW, min}(t) \cdot Y(t) = / \leq \dot{H}_F(t)\\$

where $= / \leq$ depends on the CHP being back pressure or not.

The coefficients $\alpha_0$ and $\alpha_1$ can be determined given the efficiencies maximal/minimal load:

$& \eta_{el,max,woDH}(t) = \frac{P_{el,max,woDH}(t)}{\alpha_0(t) \cdot Y(t) + \alpha_1(t) \cdot P_{el,max,woDH}(t)}\\ & \eta_{el,min,woDH}(t) = \frac{P_{el,min,woDH}(t)}{\alpha_0(t) \cdot Y(t) + \alpha_1(t) \cdot P_{el,min,woDH}(t)}\\$

For the attribute $\dot{H}_{L,FG,min}$ being not None, e.g. for a motoric CHP, the following is created:

Constraint:

$& (11)\qquad P_{el}(t) + \dot{Q}(t) + \dot{H}_{L,FG,min}(t) + \dot{Q}_{CW, min}(t) \cdot Y(t) \geq \dot{H}_F(t)\\[10pt]$

The symbols used are defined as follows (with Variables (V) and Parameters (P)):

math. symbol	attribute	type	explanation
$\dot{H}_{F}$	H_F[n,t]	V	input of enthalpy through fuel input
$P_{el}$	P[n,t]	V	provided electric power
$P_{el,woDH}$	P_woDH[n,t]	V	electric power without district heating
$P_{el,min,woDH}$	P_min_woDH[n,t]	P	min. electric power without district heating
$P_{el,max,woDH}$	P_max_woDH[n,t]	P	max. electric power without district heating
$\dot{Q}$	Q[n,t]	V	provided heat
$\dot{Q}_{CW, min}$	Q_CW_min[n,t]	P	minimal therm. condenser load to cooling water
$\dot{H}_{L,FG,min}$	H_L_FG_min[n,t]	V	flue gas enthalpy loss at min heat extraction
$\dot{H}_{L,FG,max}$	H_L_FG_max[n,t]	V	flue gas enthalpy loss at max heat extraction
$\dot{H}_{L,FG,sharemin}$	H_L_FG_share_min[n,t]	P	share of flue gas loss at min heat extraction
$\dot{H}_{L,FG,sharemax}$	H_L_FG_share_max[n,t]	P	share of flue gas loss at max heat extraction
$Y$	Y[n,t]	V	status variable on/off
$\alpha_0$	n.alphas[0][n,t]	P	coefficient describing efficiency
$\alpha_1$	n.alphas[1][n,t]	P	coefficient describing efficiency
$\beta$	Beta[n,t]	P	power loss index
$\eta_{el,min,woDH}$	Eta_el_min_woDH[n,t]	P	el. eff. at min. fuel flow w/o distr. heating
$\eta_{el,max,woDH}$	Eta_el_max_woDH[n,t]	P	el. eff. at max. fuel flow w/o distr. heating

CONSTRAINT_GROUP = True¶

oemof.solph.components.GenericStorage¶

GenericStorage and associated individual constraints (blocks) and groupings.

class oemof.solph.components.generic_storage.GenericInvestmentStorageBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for all storages with Investment being not None. See oemof.solph.options.Investment for all parameters of the Investment class.

Variables

All Storages are indexed by $n$ , which is omitted in the following for the sake of convenience. The following variables are created as attributes of om.InvestmentStorage:

$P_i(t)$

Inflow of the storage (created in oemof.solph.models.BaseModel).
$P_o(t)$

Outflow of the storage (created in oemof.solph.models.BaseModel).
$E(t)$

Current storage content (Absolute level of stored energy).
$E_{invest}$

Invested (nominal) capacity of the storage.
$E(-1)$

Initial storage content (before timestep 0).
$b_{invest}$

Binary variable for the status of the investment, if nonconvex is True.

Constraints

The following constraints are created for all investment storages:

Storage balance (Same as for GenericStorageBlock)

$E(t) = &E(t-1) \cdot (1 - \beta(t)) ^{\tau(t)/(t_u)} \\ &- \gamma(t)\cdot (E_{exist} + E_{invest}) \cdot {\tau(t)/(t_u)}\\ &- \delta(t) \cdot {\tau(t)/(t_u)}\\ &- \frac{P_o(t)}{\eta_o(t)} \cdot \tau(t) + P_i(t) \cdot \eta_i(t) \cdot \tau(t)$

Depending on the attribute nonconvex, the constraints for the bounds of the decision variable $E_{invest}$ are different:

nonconvex = False

$E_{invest, min} \le E_{invest} \le E_{invest, max}$

nonconvex = True

$& E_{invest, min} \cdot b_{invest} \le E_{invest}\\ & E_{invest} \le E_{invest, max} \cdot b_{invest}\\$

The following constraints are created depending on the attributes of the components.GenericStorage:

initial_storage_level is None

Constraint for a variable initial storage content:

$E(-1) \le E_{invest} + E_{exist}$

initial_storage_level is not None

An initial value for the storage content is given:

$E(-1) = (E_{invest} + E_{exist}) \cdot c(-1)$

balanced=True

The energy content of storage of the first and the last timestep are set equal:

$E(-1) = E(t_{last})$

invest_relation_input_capacity is not None

Connect the invest variables of the storage and the input flow:

$P_{i,invest} + P_{i,exist} = (E_{invest} + E_{exist}) \cdot r_{cap,in}$

invest_relation_output_capacity is not None

Connect the invest variables of the storage and the output flow:

$P_{o,invest} + P_{o,exist} = (E_{invest} + E_{exist}) \cdot r_{cap,out}$

invest_relation_input_output is not None

Connect the invest variables of the input and the output flow:

$P_{i,invest} + P_{i,exist} = (P_{o,invest} + P_{o,exist}) \cdot r_{in,out}$

max_storage_level

Rule for upper bound constraint for the storage content:

$E(t) \leq E_{invest} \cdot c_{max}(t)$

min_storage_level

Rule for lower bound constraint for the storage content:

$E(t) \geq E_{invest} \cdot c_{min}(t)$

Objective function

The part of the objective function added by the investment storages also depends on whether a convex or nonconvex investment option is selected. The following parts of the objective function are created:

nonconvex = False

$E_{invest} \cdot c_{invest,var}$

nonconvex = True

$E_{invest} \cdot c_{invest,var} + c_{invest,fix} \cdot b_{invest}\\$

The total value of all investment costs of all InvestmentStorages can be retrieved calling om.GenericInvestmentStorageBlock.investment_costs.expr().

List of Variables¶
symbol	attribute	explanation
$P_i(t)$	`flow[i[n], n, t]`	Inflow of the storage
$P_o(t)$	`flow[n, o[n], t]`	Outlfow of the storage
$E(t)$	`storage_content[n, t]`	Current storage content (current absolute stored energy)
$E_{invest}$	`invest[n, t]`	Invested (nominal) capacity of the storage
$E(-1)$	`init_cap[n]`	Initial storage capacity (before timestep 0)
$b_{invest}$	`invest_status[i, o]`	Binary variable for the status of investment
$P_{i,invest}$	`InvestmentFlow.invest[i[n], n]`	Invested (nominal) inflow (Investmentflow)
$P_{o,invest}$	`InvestmentFlow.invest[n, o[n]]`	Invested (nominal) outflow (Investmentflow)

List of Parameters¶
symbol	attribute	explanation
$E_{exist}$	flows[i, o].investment.existing	Existing storage capacity
$E_{invest,min}$	flows[i, o].investment.minimum	Minimum investment value
$E_{invest,max}$	flows[i, o].investment.maximum	Maximum investment value
$P_{i,exist}$	flows[i[n], n].investment.existing	Existing inflow capacity
$P_{o,exist}$	flows[n, o[n]].investment.existing	Existing outlfow capacity
$c_{invest,var}$	flows[i, o].investment.ep_costs	Variable investment costs
$c_{invest,fix}$	flows[i, o].investment.offset	Fix investment costs
$r_{cap,in}$	`invest_relation_input_capacity`	Relation of storage capacity and nominal inflow
$r_{cap,out}$	`invest_relation_output_capacity`	Relation of storage capacity and nominal outflow
$r_{in,out}$	`invest_relation_input_output`	Relation of nominal in- and outflow
$\beta(t)$	loss_rate[t]	Fraction of lost energy as share of $E(t)$ per time unit
$\gamma(t)$	fixed_losses_relative[t]	Fixed loss of energy relative to $E_{invest} + E_{exist}$ per time unit
$\delta(t)$	fixed_losses_absolute[t]	Absolute fixed loss of energy per time unit
$\eta_i(t)$	inflow_conversion_factor[t]	Conversion factor (i.e. efficiency) when storing energy
$\eta_o(t)$	outflow_conversion_factor[t]	Conversion factor when (i.e. efficiency) taking stored energy
$c(-1)$	initial_storage_level	Initial relativ storage content (before timestep 0)
$c_{max}$	flows[i, o].max[t]	Normed maximum value of storage content
$c_{min}$	flows[i, o].min[t]	Normed minimum value of storage content
$\tau(t)$		Duration of time step
$t_u$		Time unit of losses $\beta(t)$ , $\gamma(t)$ , $\delta(t)$ and timeincrement $\tau(t)$

CONSTRAINT_GROUP = True¶

class oemof.solph.components.generic_storage.GenericStorage(*args, max_storage_level=1, min_storage_level=0, **kwargs)[source]¶

Bases: oemof.network.network.Node

Component GenericStorage to model with basic characteristics of storages.

The GenericStorage is designed for one input and one output.

Parameters:

nominal_storage_capacity (numeric, $E_{nom}$ ) – Absolute nominal capacity of the storage
invest_relation_input_capacity (numeric or None, $r_{cap,in}$ ) – Ratio between the investment variable of the input Flow and the investment variable of the storage: $\dot{E}_{in,invest} = E_{invest} \cdot r_{cap,in}$
invest_relation_output_capacity (numeric or None, $r_{cap,out}$ ) – Ratio between the investment variable of the output Flow and the investment variable of the storage: $\dot{E}_{out,invest} = E_{invest} \cdot r_{cap,out}$
invest_relation_input_output (numeric or None, $r_{in,out}$ ) – Ratio between the investment variable of the output Flow and the investment variable of the input flow. This ratio used to fix the flow investments to each other. Values < 1 set the input flow lower than the output and > 1 will set the input flow higher than the output flow. If None no relation will be set: $\dot{E}_{in,invest} = \dot{E}_{out,invest} \cdot r_{in,out}$
initial_storage_level (numeric, $c(-1)$ ) – The relative storage content in the timestep before the first time step of optimization (between 0 and 1).
balanced (boolean) – Couple storage level of first and last time step. (Total inflow and total outflow are balanced.)
loss_rate (numeric (iterable or scalar)) – The relative loss of the storage content per time unit.
fixed_losses_relative (numeric (iterable or scalar), $\gamma(t)$ ) – Losses independent of state of charge between two consecutive timesteps relative to nominal storage capacity.
fixed_losses_absolute (numeric (iterable or scalar), $\delta(t)$ ) – Losses independent of state of charge and independent of nominal storage capacity between two consecutive timesteps.
inflow_conversion_factor (numeric (iterable or scalar), $\eta_i(t)$ ) – The relative conversion factor, i.e. efficiency associated with the inflow of the storage.
outflow_conversion_factor (numeric (iterable or scalar), $\eta_o(t)$ ) – see: inflow_conversion_factor
min_storage_level (numeric (iterable or scalar), $c_{min}(t)$ ) – The normed minimum storage content as fraction of the nominal storage capacity (between 0 and 1). To set different values in every time step use a sequence.
max_storage_level (numeric (iterable or scalar), $c_{max}(t)$ ) – see: min_storage_level
investment (oemof.solph.options.Investment object) – Object indicating if a nominal_value of the flow is determined by the optimization problem. Note: This will refer all attributes to an investment variable instead of to the nominal_storage_capacity. The nominal_storage_capacity should not be set (or set to None) if an investment object is used.

Notes

The following sets, variables, constraints and objective parts are created

GenericStorageBlock (if no Investment object present)
GenericInvestmentStorageBlock (if Investment object present)

Examples

Basic usage examples of the GenericStorage with a random selection of attributes. See the Flow class for all Flow attributes.

>>> from oemof import solph

>>> my_bus = solph.Bus('my_bus')

>>> my_storage = solph.components.GenericStorage(
...     label='storage',
...     nominal_storage_capacity=1000,
...     inputs={my_bus: solph.Flow(nominal_value=200, variable_costs=10)},
...     outputs={my_bus: solph.Flow(nominal_value=200)},
...     loss_rate=0.01,
...     initial_storage_level=0,
...     max_storage_level = 0.9,
...     inflow_conversion_factor=0.9,
...     outflow_conversion_factor=0.93)

>>> my_investment_storage = solph.components.GenericStorage(
...     label='storage',
...     investment=solph.Investment(ep_costs=50),
...     inputs={my_bus: solph.Flow()},
...     outputs={my_bus: solph.Flow()},
...     loss_rate=0.02,
...     initial_storage_level=None,
...     invest_relation_input_capacity=1/6,
...     invest_relation_output_capacity=1/6,
...     inflow_conversion_factor=1,
...     outflow_conversion_factor=0.8)

constraint_group()[source]¶

class oemof.solph.components.generic_storage.GenericStorageBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Storage without an Investment object.

The following sets are created: (-> see basic sets at Model )

STORAGES

A set with all Storage objects, which do not have an: attr:investment of type Investment.

STORAGES_BALANCED

A set of all GenericStorage objects, with ‘balanced’ attribute set to True.

STORAGES_WITH_INVEST_FLOW_REL

A set with all Storage objects with two investment flows coupled with the ‘invest_relation_input_output’ attribute.

The following variables are created:

storage_content: Storage content for every storage and timestep. The value for the storage content at the beginning is set by the parameter initial_storage_level or not set if initial_storage_level is None. The variable of storage s and timestep t can be accessed by: om.Storage.storage_content[s, t]

The following constraints are created:

Set storage_content of last time step to one at t=0 if balanced == True: $E(t_{last}) = &E(-1)$
Storage balance om.Storage.balance[n, t]: $E(t) = &E(t-1) \cdot (1 - \beta(t)) ^{\tau(t)/(t_u)} \\ &- \gamma(t)\cdot E_{nom} \cdot {\tau(t)/(t_u)}\\ &- \delta(t) \cdot {\tau(t)/(t_u)}\\ &- \frac{\dot{E}_o(t)}{\eta_o(t)} \cdot \tau(t) + \dot{E}_i(t) \cdot \eta_i(t) \cdot \tau(t)$
Connect the invest variables of the input and the output flow.: $InvestmentFlow.invest(source(n), n) + existing = \\ (InvestmentFlow.invest(n, target(n)) + existing) * \\ invest\_relation\_input\_output(n) \\ \forall n \in \textrm{INVEST\_REL\_IN\_OUT}$

symbol	explanation	attribute
$E(t)$	energy currently stored	storage_content
$E_{nom}$	nominal capacity of the energy storage	nominal_storage_capacity
$c(-1)$	state before initial time step	initial_storage_level
$c_{min}(t)$	minimum allowed storage	min_storage_level[t]
$c_{max}(t)$	maximum allowed storage	max_storage_level[t]
$\beta(t)$	fraction of lost energy as share of $E(t)$ per time unit	loss_rate[t]
$\gamma(t)$	fixed loss of energy relative to $E_{nom}$ per time unit	fixed_losses_relative[t]
$\delta(t)$	absolute fixed loss of energy per time unit	fixed_losses_absolute[t]
$\dot{E}_i(t)$	energy flowing in	inputs
$\dot{E}_o(t)$	energy flowing out	outputs
$\eta_i(t)$	conversion factor (i.e. efficiency) when storing energy	inflow_conversion_factor[t]
$\eta_o(t)$	conversion factor when (i.e. efficiency) taking stored energy	outflow_conversion_factor[t]
$\tau(t)$	duration of time step
$t_u$	time unit of losses $\beta(t)$ , $\gamma(t)$ $\delta(t)$ and timeincrement $\tau(t)$

The following parts of the objective function are created:

Nothing added to the objective function.

CONSTRAINT_GROUP = True¶

oemof.solph.components.OffsetTransformer¶

OffsetTransformer and associated individual constraints (blocks) and groupings.

class oemof.solph.components.offset_transformer.OffsetTransformer(*args, **kwargs)[source]¶

Bases: oemof.network.network.Transformer

An object with one input and one output.

Parameters:	coefficients (tuple) – Tuple containing the first two polynomial coefficients i.e. the y-intersection and slope of a linear equation. The tuple values can either be a scalar or a sequence with length of time horizon for simulation.

Notes

The sets, variables, constraints and objective parts are created

OffsetTransformerBlock

Examples

>>> from oemof import solph

>>> bel = solph.Bus(label='bel')
>>> bth = solph.Bus(label='bth')

>>> ostf = solph.components.OffsetTransformer(
...    label='ostf',
...    inputs={bel: solph.Flow(
...        nominal_value=60, min=0.5, max=1.0,
...        nonconvex=solph.NonConvex())},
...    outputs={bth: solph.Flow()},
...    coefficients=(20, 0.5))

>>> type(ostf)
<class 'oemof.solph.components.offset_transformer.OffsetTransformer'>

constraint_group()[source]¶

class oemof.solph.components.offset_transformer.OffsetTransformerBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the relation of nodes with type OffsetTransformer

The following constraints are created:

$& P_{out}(t) = C_1(t) \cdot P_{in}(t) + C_0(t) \cdot Y(t) \\$

Variables (V) and Parameters (P)¶
symbol	attribute	type	explanation
$P_{out}(t)$	flow[n, o, t]	V	Power of output
$P_{in}(t)$	flow[i, n, t]	V	Power of input
$Y(t)$	status[i, n, t]	V	binary status variable of nonconvex input flow
$C_1(t)$	coefficients[1][n, t]	P	linear coefficient 1 (slope)
$C_0(t)$	coefficients[0][n, t]	P	linear coefficient 0 (y-intersection)

CONSTRAINT_GROUP = True¶

oemof.solph.constraints module¶

Additional constraints to be used in an oemof energy model.

oemof.solph.constraints.equate_variables(model, var1, var2, factor1=1, name=None)[source]¶

Adds a constraint to the given model that set two variables to equal adaptable by a factor.

The following constraints are build:

$var\textit{1} \cdot factor\textit{1} = var\textit{2}$

Parameters:

var1 (pyomo.environ.Var) – First variable, to be set to equal with Var2 and multiplied with factor1.
var2 (pyomo.environ.Var) – Second variable, to be set equal to (Var1 * factor1).
factor1 (float) – Factor to define the proportion between the variables.
name (str) – Optional name for the equation e.g. in the LP file. By default the name is: equate + string representation of var1 and var2.
model (oemof.solph.Model) – Model to which the constraint is added.

Examples

The following example shows how to define a transmission line in the investment mode by connecting both investment variables. Note that the equivalent periodical costs (epc) of the line are 40. You could also add them to one line and set them to 0 for the other line.

>>> import pandas as pd
>>> from oemof import solph
>>> date_time_index = pd.date_range('1/1/2012', periods=5, freq='H')
>>> energysystem = solph.EnergySystem(timeindex=date_time_index)
>>> bel1 = solph.Bus(label='electricity1')
>>> bel2 = solph.Bus(label='electricity2')
>>> energysystem.add(bel1, bel2)
>>> energysystem.add(solph.Transformer(
...    label='powerline_1_2',
...    inputs={bel1: solph.Flow()},
...    outputs={bel2: solph.Flow(
...        investment=solph.Investment(ep_costs=20))}))
>>> energysystem.add(solph.Transformer(
...    label='powerline_2_1',
...    inputs={bel2: solph.Flow()},
...   outputs={bel1: solph.Flow(
...       investment=solph.Investment(ep_costs=20))}))
>>> om = solph.Model(energysystem)
>>> line12 = energysystem.groups['powerline_1_2']
>>> line21 = energysystem.groups['powerline_2_1']
>>> solph.constraints.equate_variables(
...    om,
...    om.InvestmentFlow.invest[line12, bel2],
...    om.InvestmentFlow.invest[line21, bel1])

oemof.solph.constraints.limit_active_flow_count(model, constraint_name, flows, lower_limit=0, upper_limit=None)[source]¶

Set limits (lower and/or upper) for the number of concurrently active NonConvex flows. The flows are given as a list.

Total actual counts after optimization can be retrieved calling the om.oemof.solph.Model.$(constraint_name)_count().

Parameters:	model (oemof.solph.Model) – Model to which constraints are added constraint_name (string) – name for the constraint flows (list of flows) – flows (have to be NonConvex) in the format [(in, out)] lower_limit (integer) – minimum number of active flows in the list upper_limit (integer) – maximum number of active flows in the list
Returns:	the updated model

Note

Flow objects required to be NonConvex

Constraint:

$N_{X,min} \le \sum_{n \in F} X_n(t) \le N_{X,max} \forall t \in T$

With F being the set of considered flows and T being the set of time steps.

The symbols used are defined as follows (with Variables (V) and Parameters (P)):

math. symbol	type	explanation
$X_n(t)$	V	status (0 or 1) of the flow $n$ at time step $t$
$N_{X,min}$	P	lower_limit
$N_{X,max}$	P	lower_limit

oemof.solph.constraints.limit_active_flow_count_by_keyword(model, keyword, lower_limit=0, upper_limit=None)[source]¶

This wrapper for limit_active_flow_count allows to set limits to the count of concurrently active flows by using a keyword instead of a list. The constraint will be named $(keyword)_count.

Parameters:	model (oemof.solph.Model) – Model to which constraints are added keyword (string) – keyword to consider (searches all NonConvexFlows) lower_limit (integer) – minimum number of active flows having the keyword upper_limit (integer) – maximum number of active flows having the keyword
Returns:	the updated model

oemof.solph.console_scripts module¶

This module can be used to check the installation.

This is not an illustrated example.

oemof.solph.console_scripts.check_oemof_installation(silent=False)[source]¶

oemof.solph.custom.ElectricalLine¶

In-development electrical line components.

class oemof.solph.custom.electrical_line.ElectricalBus(*args, **kwargs)[source]¶

Bases: oemof.solph.network.bus.Bus

A electrical bus object. Every node has to be connected to Bus. This Bus is used in combination with ElectricalLine objects for linear optimal power flow (lopf) calculations.

Parameters:	slack (boolean) – If True Bus is slack bus for network v_max (numeric) – Maximum value of voltage angle at electrical bus v_min (numeric) – Mininum value of voltag angle at electrical bus Note (This component is experimental. Use it with care.)

Notes

The following sets, variables, constraints and objective parts are created

Bus

The objects are also used inside:

ElectricalLine

class oemof.solph.custom.electrical_line.ElectricalLine(*args, **kwargs)[source]¶

Bases: oemof.solph.network.flow.Flow

An ElectricalLine to be used in linear optimal power flow calculations. based on angle formulation. Check out the Notes below before using this component!

Parameters:	reactance (float or array of floats) – Reactance of the line to be modelled Note (This component is experimental. Use it with care.)

Notes

To use this object the connected buses need to be of the type ElectricalBus.
It does not work together with flows that have set the attr.`nonconvex`, i.e. unit commitment constraints are not possible
Input and output of this component are set equal, therefore just use either only the input or the output to parameterize.
Default attribute min of in/outflows is overwritten by -1 if not set differently by the user

The following sets, variables, constraints and objective parts are created

ElectricalLineBlock

constraint_group()[source]¶

class oemof.solph.custom.electrical_line.ElectricalLineBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the linear relation of nodes with type class:.ElectricalLine

Note: This component is experimental. Use it with care.

The following constraints are created:

Linear relation om.ElectricalLine.electrical_flow[n,t]: $flow(n, o, t) = 1 / reactance(n, t) \\cdot () voltage_angle(i(n), t) - volatage_angle(o(n), t), \\ \forall t \\in \\textrm{TIMESTEPS}, \\ \forall n \\in \\textrm{ELECTRICAL\_LINES}.$

TODO: Add equate constraint of flows

The following variable are created:

TODO: Add voltage angle variable

TODO: Add fix slack bus voltage angle to zero constraint / bound

TODO: Add tests

CONSTRAINT_GROUP = True¶

oemof.solph.custom.GenericCAES¶

In-development generic compressed air energy storage.

class oemof.solph.custom.generic_caes.GenericCAES(*args, **kwargs)[source]¶

Bases: oemof.network.network.Transformer

Component GenericCAES to model arbitrary compressed air energy storages.

The full set of equations is described in: Kaldemeyer, C.; Boysen, C.; Tuschy, I. A Generic Formulation of Compressed Air Energy Storage as Mixed Integer Linear Program – Unit Commitment of Specific Technical Concepts in Arbitrary Market Environments Materials Today: Proceedings 00 (2018) 0000–0000 [currently in review]

Parameters:

electrical_input (dict) – Dictionary with key-value-pair of oemof.Bus and oemof.Flow object for the electrical input.
fuel_input (dict) – Dictionary with key-value-pair of oemof.Bus and oemof.Flow object for the fuel input.
electrical_output (dict) – Dictionary with key-value-pair of oemof.Bus and oemof.Flow object for the electrical output.
Note (This component is experimental. Use it with care.)

Notes

The following sets, variables, constraints and objective parts are created

GenericCAES

TODO: Add description for constraints. See referenced paper until then!

Examples

>>> from oemof import solph
>>> bel = solph.Bus(label='bel')
>>> bth = solph.Bus(label='bth')
>>> bgas = solph.Bus(label='bgas')
>>> # dictionary with parameters for a specific CAES plant
>>> concept = {
...    'cav_e_in_b': 0,
...    'cav_e_in_m': 0.6457267578,
...    'cav_e_out_b': 0,
...    'cav_e_out_m': 0.3739636077,
...    'cav_eta_temp': 1.0,
...    'cav_level_max': 211.11,
...    'cmp_p_max_b': 86.0918959849,
...    'cmp_p_max_m': 0.0679999932,
...    'cmp_p_min': 1,
...    'cmp_q_out_b': -19.3996965679,
...    'cmp_q_out_m': 1.1066036114,
...    'cmp_q_tes_share': 0,
...    'exp_p_max_b': 46.1294016678,
...    'exp_p_max_m': 0.2528340303,
...    'exp_p_min': 1,
...    'exp_q_in_b': -2.2073411014,
...    'exp_q_in_m': 1.129249765,
...    'exp_q_tes_share': 0,
...    'tes_eta_temp': 1.0,
...    'tes_level_max': 0.0}
>>> # generic compressed air energy storage (caes) plant
>>> caes = solph.custom.GenericCAES(
...    label='caes',
...    electrical_input={bel: solph.Flow()},
...    fuel_input={bgas: solph.Flow()},
...    electrical_output={bel: solph.Flow()},
...    params=concept, fixed_costs=0)
>>> type(caes)
<class 'oemof.solph.custom.generic_caes.GenericCAES'>

constraint_group()[source]¶

class oemof.solph.custom.generic_caes.GenericCAESBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for nodes of class:.GenericCAES.

Note: This component is experimental. Use it with care.

The following constraints are created:

$& (1) \qquad P_{cmp}(t) = electrical\_input (t) \quad \forall t \in T \\ & (2) \qquad P_{cmp\_max}(t) = m_{cmp\_max} \cdot CAS_{fil}(t-1) + b_{cmp\_max} \quad \forall t \in\left[1, t_{max}\right] \\ & (3) \qquad P_{cmp\_max}(t) = b_{cmp\_max} \quad \forall t \notin\left[1, t_{max}\right] \\ & (4) \qquad P_{cmp}(t) \leq P_{cmp\_max}(t) \quad \forall t \in T \\ & (5) \qquad P_{cmp}(t) \geq P_{cmp\_min} \cdot ST_{cmp}(t) \quad \forall t \in T \\ & (6) \qquad P_{cmp}(t) = m_{cmp\_max} \cdot CAS_{fil\_max} + b_{cmp\_max} \cdot ST_{cmp}(t) \quad \forall t \in T \\ & (7) \qquad \dot{Q}_{cmp}(t) = m_{cmp\_q} \cdot P_{cmp}(t) + b_{cmp\_q} \cdot ST_{cmp}(t) \quad \forall t \in T \\ & (8) \qquad \dot{Q}_{cmp}(t) = \dot{Q}_{cmp_out}(t) + \dot{Q}_{tes\_in}(t) \quad \forall t \in T \\ & (9) \qquad r_{cmp\_tes} \cdot\dot{Q}_{cmp\_out}(t) = \left(1-r_{cmp\_tes}\right) \dot{Q}_{tes\_in}(t) \quad \forall t \in T \\ & (10) \quad\; P_{exp}(t) = electrical\_output (t) \quad \forall t \in T \\ & (11) \quad\; P_{exp\_max}(t) = m_{exp\_max} CAS_{fil}(t-1) + b_{exp\_max} \quad \forall t \in\left[1, t_{\max }\right] \\ & (12) \quad\; P_{exp\_max}(t) = b_{exp\_max} \quad \forall t \notin\left[1, t_{\max }\right] \\ & (13) \quad\; P_{exp}(t) \leq P_{exp\_max}(t) \quad \forall t \in T \\ & (14) \quad\; P_{exp}(t) \geq P_{exp\_min}(t) \cdot ST_{exp}(t) \quad \forall t \in T \\ & (15) \quad\; P_{exp}(t) \leq m_{exp\_max} \cdot CAS_{fil\_max} + b_{exp\_max} \cdot ST_{exp}(t) \quad \forall t \in T \\ & (16) \quad\; \dot{Q}_{exp}(t) = m_{exp\_q} \cdot P_{exp}(t) + b_{cxp\_q} \cdot ST_{cxp}(t) \quad \forall t \in T \\ & (17) \quad\; \dot{Q}_{exp\_in}(t) = fuel\_input(t) \quad \forall t \in T \\ & (18) \quad\; \dot{Q}_{exp}(t) = \dot{Q}_{exp\_in}(t) + \dot{Q}_{tes\_out}(t)+\dot{Q}_{cxp\_add}(t) \quad \forall t \in T \\ & (19) \quad\; r_{exp\_tes} \cdot \dot{Q}_{exp\_in}(t) = (1 - r_{exp\_tes})(\dot{Q}_{tes\_out}(t) + \dot{Q}_{exp\_add}(t)) \quad \forall t \in T \\ & (20) \quad\; \dot{E}_{cas\_in}(t) = m_{cas\_in}\cdot P_{cmp}(t) + b_{cas\_in}\cdot ST_{cmp}(t) \quad \forall t \in T \\ & (21) \quad\; \dot{E}_{cas\_out}(t) = m_{cas\_out}\cdot P_{cmp}(t) + b_{cas\_out}\cdot ST_{cmp}(t) \quad \forall t \in T \\ & (22) \quad\; \eta_{cas\_tmp} \cdot CAS_{fil}(t) = CAS_{fil}(t-1) + \tau\left(\dot{E}_{cas\_in}(t) - \dot{E}_{cas\_out}(t)\right) \quad \forall t \in\left[1, t_{max}\right] \\ & (23) \quad\; \eta_{cas\_tmp} \cdot CAS_{fil}(t) = \tau\left(\dot{E}_{cas\_in}(t) - \dot{E}_{cas\_out}(t)\right) \quad \forall t \notin\left[1, t_{max}\right] \\ & (24) \quad\; CAS_{fil}(t) \leq CAS_{fil\_max} \quad \forall t \in T \\ & (25) \quad\; TES_{fil}(t) = TES_{fil}(t-1) + \tau\left(\dot{Q}_{tes\_in}(t) - \dot{Q}_{tes\_out}(t)\right) \quad \forall t \in\left[1, t_{max}\right] \\ & (26) \quad\; TES_{fil}(t) = \tau\left(\dot{Q}_{tes\_in}(t) - \dot{Q}_{tes\_out}(t)\right) \quad \forall t \notin\left[1, t_{max}\right] \\ & (27) \quad\; TES_{fil}(t) \leq TES_{fil\_max} \quad \forall t \in T \\ &$

Table: Symbols and attribute names of variables and parameters

Variables (V) and Parameters (P)¶
symbol	attribute	type	explanation
$ST_{cmp}$	cmp_st[n,t]	V	Status of compression
${P}_{cmp}$	cmp_p[n,t]	V	Compression power
${P}_{cmp\_max}$	cmp_p_max[n,t]	V	Max. compression power
$\dot{Q}_{cmp}$	cmp_q_out_sum[n,t]	V	Summed heat flow in compression
$\dot{Q}_{cmp\_out}$	cmp_q_waste[n,t]	V	Waste heat flow from compression
$ST_{exp}(t)$	exp_st[n,t]	V	Status of expansion (binary)
$P_{exp}(t)$	exp_p[n,t]	V	Expansion power
$P_{exp\_max}(t)$	exp_p_max[n,t]	V	Max. expansion power
$\dot{Q}_{exp}(t)$	exp_q_in_sum[n,t]	V	Summed heat flow in expansion
$\dot{Q}_{exp\_in}(t)$	exp_q_fuel_in[n,t]	V	Heat (external) flow into expansion
$\dot{Q}_{exp\_add}(t)$	exp_q_add_in[n,t]	V	Additional heat flow into expansion
$CAV_{fil}(t)$	cav_level[n,t]	V	Filling level if CAE
$\dot{E}_{cas\_in}(t)$	cav_e_in[n,t]	V	Exergy flow into CAS
$\dot{E}_{cas\_out}(t)$	cav_e_out[n,t]	V	Exergy flow from CAS
$TES_{fil}(t)$	tes_level[n,t]	V	Filling level of Thermal Energy Storage (TES)
$\dot{Q}_{tes\_in}(t)$	tes_e_in[n,t]	V	Heat flow into TES
$\dot{Q}_{tes\_out}(t)$	tes_e_out[n,t]	V	Heat flow from TES
$b_{cmp\_max}$	cmp_p_max_b[n,t]	P	Specific y-intersection
$b_{cmp\_q}$	cmp_q_out_b[n,t]	P	Specific y-intersection
$b_{exp\_max}$	exp_p_max_b[n,t]	P	Specific y-intersection
$b_{exp\_q}$	exp_q_in_b[n,t]	P	Specific y-intersection
$b_{cas\_in}$	cav_e_in_b[n,t]	P	Specific y-intersection
$b_{cas\_out}$	cav_e_out_b[n,t]	P	Specific y-intersection
$m_{cmp\_max}$	cmp_p_max_m[n,t]	P	Specific slope
$m_{cmp\_q}$	cmp_q_out_m[n,t]	P	Specific slope
$m_{exp\_max}$	exp_p_max_m[n,t]	P	Specific slope
$m_{exp\_q}$	exp_q_in_m[n,t]	P	Specific slope
$m_{cas\_in}$	cav_e_in_m[n,t]	P	Specific slope
$m_{cas\_out}$	cav_e_out_m[n,t]	P	Specific slope
$P_{cmp\_min}$	cmp_p_min[n,t]	P	Min. compression power
$r_{cmp\_tes}$	cmp_q_tes_share[n,t]	P	Ratio between waste heat flow and heat flow into TES
$r_{exp\_tes}$	exp_q_tes_share[n,t]	P	Ratio between external heat flow into expansion and heat flows from TES and additional source
$\tau$	m.timeincrement[n,t]	P	Time interval length
$TES_{fil\_max}$	tes_level_max[n,t]	P	Max. filling level of TES
$CAS_{fil\_max}$	cav_level_max[n,t]	P	Max. filling level of TES
$\tau$	cav_eta_tmp[n,t]	P	Temporal efficiency (loss factor to take intertemporal losses into account)
$electrical\_input$	flow[list(n.electrical_input.keys())[0], n, t]	P	Electr. power input into compression
$electrical\_output$	flow[n, list(n.electrical_output.keys())[0], t]	P	Electr. power output of expansion
$fuel\_input$	flow[list(n.fuel_input.keys())[0], n, t]	P	Heat input (external) into Expansion

CONSTRAINT_GROUP = True¶

oemof.solph.custom.Link¶

In-development component to add some intelligence to connection between two Nodes.

class oemof.solph.custom.link.Link(*args, **kwargs)[source]¶

Bases: oemof.network.network.Transformer

A Link object with 1…2 inputs and 1…2 outputs.

Parameters:	conversion_factors (dict) – Dictionary containing conversion factors for conversion of each flow. Keys are the connected tuples (input, output) bus objects. The dictionary values can either be a scalar or an iterable with length of time horizon for simulation. Note (This component is experimental. Use it with care.)

Notes

The sets, variables, constraints and objective parts are created

LinkBlock

Examples

>>> from oemof import solph
>>> bel0 = solph.Bus(label="el0")
>>> bel1 = solph.Bus(label="el1")

>>> link = solph.custom.Link(
...    label="transshipment_link",
...    inputs={bel0: solph.Flow(), bel1: solph.Flow()},
...    outputs={bel0: solph.Flow(), bel1: solph.Flow()},
...    conversion_factors={(bel0, bel1): 0.92, (bel1, bel0): 0.99})
>>> print(sorted([x[1][5] for x in link.conversion_factors.items()]))
[0.92, 0.99]

>>> type(link)
<class 'oemof.solph.custom.link.Link'>

>>> sorted([str(i) for i in link.inputs])
['el0', 'el1']

>>> link.conversion_factors[(bel0, bel1)][3]
0.92

constraint_group()[source]¶

class oemof.solph.custom.link.LinkBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the relation of nodes with type Link

Note: This component is experimental. Use it with care.

The following constraints are created:

TODO: Add description for constraints TODO: Add tests

CONSTRAINT_GROUP = True¶

oemof.solph.custom.PiecewiseLinearTransformer¶

In-development transfomer with piecewise linar efficiencies.

class oemof.solph.custom.piecewise_linear_transformer.PiecewiseLinearTransformer(*args, **kwargs)[source]¶

Bases: oemof.network.network.Transformer

Component to model a transformer with one input and one output and an arbitrary piecewise linear conversion function.

Parameters:	in_breakpoints (list) – List containing the domain breakpoints, i.e. the breakpoints for the incoming flow. conversion_function (func) – The function describing the relation between incoming flow and outgoing flow which is to be approximated. pw_repn (string) – Choice of piecewise representation that is passed to pyomo.environ.Piecewise

Examples

>>> import oemof.solph as solph

>>> b_gas = solph.Bus(label='biogas')
>>> b_el = solph.Bus(label='electricity')

>>> pwltf = solph.custom.PiecewiseLinearTransformer(
...    label='pwltf',
...    inputs={b_gas: solph.Flow(
...    nominal_value=100,
...    variable_costs=1)},
...    outputs={b_el: solph.Flow()},
...    in_breakpoints=[0,25,50,75,100],
...    conversion_function=lambda x: x**2,
...    pw_repn='CC')

>>> type(pwltf)
<class 'oemof.solph.custom.piecewise_linear_transformer.PiecewiseLinearTransformer'>

constraint_group()[source]¶

class oemof.solph.custom.piecewise_linear_transformer.PiecewiseLinearTransformerBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Block for the relation of nodes with type PiecewiseLinearTransformer

The following constraints are created:

CONSTRAINT_GROUP = True¶

oemof.solph.custom.SinkDSM¶

In-development functionality for demand-side management.

class oemof.solph.custom.sink_dsm.SinkDSM(demand, capacity_up, capacity_down, approach, shift_interval=None, delay_time=None, shift_time=None, shed_time=None, max_demand=None, max_capacity_down=None, max_capacity_up=None, flex_share_down=None, flex_share_up=None, cost_dsm_up=0, cost_dsm_down_shift=0, cost_dsm_down_shed=0, efficiency=1, recovery_time_shift=None, recovery_time_shed=None, ActivateYearLimit=False, ActivateDayLimit=False, n_yearLimit_shift=None, n_yearLimit_shed=None, t_dayLimit=None, addition=True, fixes=True, shed_eligibility=True, shift_eligibility=True, **kwargs)[source]¶

Bases: oemof.solph.network.sink.Sink

Demand Side Management implemented as Sink with flexibility potential.

There are several approaches possible which can be selected: - DIW: Based on the paper by Zerrahn, Alexander and Schill, Wolf-Peter (2015): On the representation of demand-side management in power system models, in: Energy (84), pp. 840-845, 10.1016/j.energy.2015.03.037, accessed 08.01.2021, pp. 842-843. - DLR: Based on the PhD thesis of Gils, Hans Christian (2015): Balancing of Intermittent Renewable Power Generation by Demand Response and Thermal Energy Storage, Stuttgart, <http://dx.doi.org/10.18419/opus-6888>, accessed 08.01.2021, pp. 67-70. - oemof: Created by Julian Endres. A fairly simple DSM representation which demands the energy balance to be levelled out in fixed cycles

An evaluation of different modeling approaches has been carried out and presented at the INREC 2020. Some of the results are as follows: - DIW: A solid implementation with the tendency of slight overestimization of potentials since a shift_time is not accounted for. It may get computationally expensive due to a high time-interlinkage in constraint formulations. - DLR: An extensive modeling approach for demand response which neither leads to an over- nor underestimization of potentials and balances modeling detail and computation intensity. fixes and addition should both be set to True which is the default value. - oemof: A very computationally efficient approach which only requires the energy balance to be levelled out in certain intervals. If demand response is not at the center of the research and/or parameter availability is limited, this approach should be chosen. Note that approach oemof does allow for load shedding, but does not impose a limit on maximum amount of shedded energy.

SinkDSM adds additional constraints that allow to shift energy in certain time window constrained by capacity_up and capacity_down.

Parameters:

demand (numeric) – original electrical demand (normalized) For investment modeling, it is advised to use the maximum of the demand timeseries and the cumulated (fixed) infeed time series for normalization, because the balancing potential may be determined by both. Elsewhise, underinvestments may occur.
capacity_up (int or array) – maximum DSM capacity that may be increased (normalized)
capacity_down (int or array) – maximum DSM capacity that may be reduced (normalized)
approach (‘oemof’, ‘DIW’, ‘DLR’) – Choose one of the DSM modeling approaches. Read notes about which parameters to be applied for which approach.

oemof :

Simple model in which the load shift must be compensated in a predefined fixed interval (shift_interval is mandatory). Within time windows of the length shift_interval DSM up and down shifts are balanced. See SinkDSMOemofBlock for details.

DIW :

Sophisticated model based on the formulation by Zerrahn & Schill (2015a). The load shift of the component must be compensated in a predefined delay time (delay_time is mandatory). For details see SinkDSMDIWBlock.

DLR :

Sophisticated model based on the formulation by Gils (2015). The load shift of the component must be compensated in a predefined delay time (delay_time is mandatory). For details see SinkDSMDLRBlock.
shift_interval (int) – Only used when approach is set to ‘oemof’. Otherwise, can be None. It’s the interval in which between $DSM_{t}^{up}$ and $DSM_{t}^{down}$ have to be compensated.
delay_time (int) – Only used when approach is set to ‘DIW’ or ‘DLR’. Otherwise, can be None. Length of symmetrical time windows around $t$ in which $DSM_{t}^{up}$ and $DSM_{t,tt}^{down}$ have to be compensated. Note: For approach ‘DLR’, an iterable is constructed in order to model flexible delay times
shift_time (int) – Only used when approach is set to ‘DLR’. Duration of a single upwards or downwards shift (half a shifting cycle if there is immediate compensation)
shed_time (int) – Only used when shed_eligibility is set to True. Maximum length of a load shedding process at full capacity (used within energy limit constraint)
max_demand (numeric) – Maximum demand prior to demand response
max_capacity_down (numeric) – Maximum capacity eligible for downshifts prior to demand response (used for dispatch mode)
max_capacity_up (numeric) – Maximum capacity eligible for upshifts prior to demand response (used for dispatch mode)
flex_share_down (float) – Flexible share of installed capacity eligible for downshifts (used for invest mode)
flex_share_up (float) – Flexible share of installed capacity eligible for upshifts (used for invest mode)
cost_dsm_up (int) – Cost per unit of DSM activity that increases the demand
cost_dsm_down_shift (int) – Cost per unit of DSM activity that decreases the demand for load shifting
cost_dsm_down_shed (int) – Cost per unit of DSM activity that decreases the demand for load shedding
efficiency (float) – Efficiency factor for load shifts (between 0 and 1)
recovery_time_shift (int) – Only used when approach is set to ‘DIW’. Minimum time between the end of one load shifting process and the start of another for load shifting processes
recovery_time_shed (int) – Only used when approach is set to ‘DIW’. Minimum time between the end of one load shifting process and the start of another for load shedding processes
ActivateYearLimit (boolean) – Only used when approach is set to ‘DLR’. Control parameter; activates constraints for year limit if set to True
ActivateDayLimit (boolean) – Only used when approach is set to ‘DLR’. Control parameter; activates constraints for day limit if set to True
n_yearLimit_shift (int) – Only used when approach is set to ‘DLR’. Maximum number of load shifts at full capacity per year, used to limit the amount of energy shifted per year. Optional parameter that is only needed when ActivateYearLimit is True
n_yearLimit_shed (int) – Only used when approach is set to ‘DLR’. Maximum number of load sheds at full capacity per year, used to limit the amount of energy shedded per year. Mandatory parameter if load shedding is allowed by setting shed_eligibility to True
t_dayLimit (int) – Only used when approach is set to ‘DLR’. Maximum duration of load shifts at full capacity per day, used to limit the amount of energy shifted per day. Optional parameter that is only needed when ActivateDayLimit is True
addition (boolean) – Only used when approach is set to ‘DLR’. Boolean parameter indicating whether or not to include additional constraint (which corresponds to Eq. 10 from Zerrahn and Schill (2015a)
fixes (boolean) – Only used when approach is set to ‘DLR’. Boolean parameter indicating whether or not to include additional fixes. These comprise prohibiting shifts which cannot be balanced within the optimization timeframe
shed_eligibility (boolean) – Boolean parameter indicating whether unit is eligible for load shedding
shift_eligibility (boolean) – Boolean parameter indicating whether unit is eligible for load shifting

Note

method has been renamed to approach.
As many constraints and dependencies are created in approach ‘DIW’, computational cost might be high with a large ‘delay_time’ and with model of high temporal resolution
The approach ‘DLR’ preforms better in terms of calculation time, compared to the approach ‘DIW’
Using approach ‘DIW’ or ‘DLR’ might result in demand shifts that exceed the specified delay time by activating up and down simultaneously in the time steps between to DSM events. Thus, the purpose of this component is to model demand response portfolios rather than individual demand units.
It’s not recommended to assign cost to the flow that connects SinkDSM with a bus. Instead, use cost_dsm_up or cost_dsm_down_shift
Variable costs may be attributed to upshifts, downshifts or both. Costs for shedding may deviate from that for shifting (usually costs for shedding are much larger and equal to the value of lost load).

constraint_group()[source]¶

class oemof.solph.custom.sink_dsm.SinkDSMDIWBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Constraints for SinkDSM with “DIW” approach

The following constraints are created for approach = ‘DIW’:

$& (1) \quad DSM_{t}^{up} = 0 \quad \forall t \quad if \space eligibility_{shift} = False \\ & (2) \quad DSM_{t}^{do, shed} = 0 \quad \forall t \quad if \space eligibility_{shed} = False \\ & (3) \quad \dot{E}_{t} = demand_{t} \cdot demand_{max} + DSM_{t}^{up} - \sum_{tt=t-L}^{t+L} DSM_{tt,t}^{do, shift} - DSM_{t}^{do, shed} \quad \forall t \in \mathbb{T} \\ & (4) \quad DSM_{t}^{up} \cdot \eta = \sum_{tt=t-L}^{t+L} DSM_{t,tt}^{do, shift} \quad \forall t \in \mathbb{T} \\ & (5) \quad DSM_{t}^{up} \leq E_{t}^{up} \cdot E_{up, max} \quad \forall t \in \mathbb{T} \\ & (6) \quad \sum_{t=tt-L}^{tt+L} DSM_{t,tt}^{do, shift} + DSM_{tt}^{do, shed} \leq E_{tt}^{do} \cdot E_{do, max} \quad \forall tt \in \mathbb{T} \\ & (7) \quad DSM_{tt}^{up} + \sum_{t=tt-L}^{tt+L} DSM_{t,tt}^{do, shift} + DSM_{tt}^{do, shed} \leq max \{ E_{tt}^{up} \cdot E_{up, max}, E_{tt}^{do} \cdot E_{do, max} \} \quad \forall tt \in \mathbb{T} \\ & (8) \quad \sum_{tt=t}^{t+R-1} DSM_{tt}^{up} \leq E_{t}^{up} \cdot E_{up, max} \cdot L \cdot \Delta t \quad \forall t \in \mathbb{T} \\ & (9) \quad \sum_{tt=t}^{t+R-1} DSM_{tt}^{do, shed} \leq E_{t}^{do} \cdot E_{do, max} \cdot t_{shed} \cdot \Delta t \quad \forall t \in \mathbb{T} \\ &$

Note: For the sake of readability, the handling of indices is not displayed here. E.g. evaluating a variable for t-L may lead to a negative and therefore infeasible index. This is addressed by limiting the sums to non-negative indices within the model index bounds. Please refer to the constraints implementation themselves.

The following parts of the objective function are created:

$DSM_{t}^{up} \cdot cost_{t}^{dsm, up} + \sum_{tt=0}^{|T|} DSM_{t, tt}^{do, shift} \cdot cost_{t}^{dsm, do, shift} + DSM_{t}^{do, shed} \cdot cost_{t}^{dsm, do, shed} \quad \forall t \in \mathbb{T} \\$

Table: Symbols and attribute names of variables and parameters

Variables (V) and Parameters (P)¶

symbol attribute type explanation

$DSM_{t}^{up}$ dsm_up[g,t]

V DSM up shift (additional load) in hour t

$DSM_{t,tt}^{do, shift}$

dsm_do_shift[g,t,tt]

V DSM down shift (less load) in hour tt to compensate for upwards shifts in hour t

$DSM_{t}^{do, shed}$ dsm_do_shed[g,t]

V DSM shedded (capacity shedded, i.e. not compensated for)

$\dot{E}_{t}$ flow[g,t] V Energy flowing in from (electrical) inflow bus

$L$ delay_time P

Maximum delay time for load shift (time until the energy balance has to be levelled out again; roundtrip time of one load shifting cycle, i.e. time window for upshift and compensating downshift)

$t_{she}$ shed_time P

Maximum time for one load shedding process

$demand_{t}$ demand[t] P

(Electrical) demand series (normalized)

$demand_{max}$ max_demand P

Maximum demand value

$E_{t}^{do}$ capacity_down[t] P

Capacity allowed for a load adjustment downwards (normalized) (DSM down shift + DSM shedded)

$E_{t}^{up}$ capacity_up[t] P

Capacity allowed for a shift upwards (normalized) (DSM up shift)

$E_{do, max}$ max_capacity_down P

Maximum capacity allowed for a load adjustment downwards (DSM down shift + DSM shedded)

$E_{up, max}$ max_capacity_up P

Capacity allowed for a shift upwards (normalized) (DSM up shift)

$\eta$ efficiency P Efficiency loss for load shifting processes

$\mathbb{T}$ P Time steps

$eligibility_{shift}$

shift_eligibility P

Boolean parameter indicating if unit can be used for load shifting

$eligibility_{shed}$

shed_eligibility P

Boolean parameter indicating if unit can be used for load shedding

$cost_{t}^{dsm, up}$ cost_dsm_up[t]

P Variable costs for an upwards shift

$cost_{t}^{dsm, do, shift}$

cost_dsm_down_shift[t] P

Variable costs for a downwards shift (load shifting)

$cost_{t}^{dsm, do, shed}$

cost_dsm_down_shed[t] P

Variable costs for shedding load

System Message: WARNING/2 (\R)
latex exited with error [stdout] This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=latex) restricted \write18 enabled. entering extended mode (./math.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (/usr/share/texlive/texmf-dist/tex/latex/base/article.cls Document Class: article 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size12.clo)) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/ucs/utf8x.def)) (/usr/share/texlive/texmf-dist/tex/latex/ucs/ucs.sty (/usr/share/texlive/texmf-dist/tex/latex/ucs/data/uni-global.def)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amscls/amsthm.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/latex/anyfontsize/anyfontsize.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/bm.sty) (./math.aux) (/usr/share/texlive/texmf-dist/tex/latex/ucs/ucsencs.def) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) ! Undefined control sequence. <recently read> \R l.13 \fontsize{12}{14}\selectfont $\R $ [1] (./math.aux) ) (see the transcript file for additional information) Output written on math.dvi (1 page, 152 bytes). Transcript written on math.log.
recovery_time_shift P

Minimum time between the end of one load shifting process and the start of another

$\Delta t$ timeincrement P

The time increment of the model

CONSTRAINT_GROUP = True¶

class oemof.solph.custom.sink_dsm.SinkDSMDIWInvestmentBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Constraints for SinkDSM with “DIW” approach and investment

The following constraints are created for approach = ‘DIW’ with an investment object defined:

$& (1) \quad invest_{min} \leq invest \leq invest_{max} \\ & (2) \quad DSM_{t}^{up} = 0 \quad \forall t \quad if \space eligibility_{shift} = False \\ & (3) \quad DSM_{t}^{do, shed} = 0 \quad \forall t \quad if \space eligibility_{shed} = False \\ & (4) \quad \dot{E}_{t} = demand_{t} \cdot (invest + E_{exist}) + DSM_{t}^{up} - \sum_{tt=t-L}^{t+L} DSM_{tt,t}^{do, shift} - DSM_{t}^{do, shed} \quad \forall t \in \mathbb{T} \\ & (5) \quad DSM_{t}^{up} \cdot \eta = \sum_{tt=t-L}^{t+L} DSM_{t,tt}^{do, shift} \quad \forall t \in \mathbb{T} \\ & (6) \quad DSM_{t}^{up} \leq E_{t}^{up} \cdot (invest + E_{exist}) \ s_{flex, up} \quad \forall t \in \mathbb{T} \\ & (7) \quad \sum_{t=tt-L}^{tt+L} DSM_{t,tt}^{do, shift} + DSM_{tt}^{do, shed} \leq E_{tt}^{do} \cdot (invest + E_{exist}) \cdot s_{flex, do} \quad \forall tt \in \mathbb{T} \\ & (8) \quad DSM_{tt}^{up} + \sum_{t=tt-L}^{tt+L} DSM_{t,tt}^{do, shift} + DSM_{tt}^{do, shed} \leq max \{ E_{tt}^{up} \cdot s_{flex, up}, E_{tt}^{do} \cdot s_{flex, do} \} \cdot (invest + E_{exist}) \quad \forall tt \in \mathbb{T} \\ & (9) \quad \sum_{tt=t}^{t+R-1} DSM_{tt}^{up} \leq E_{t}^{up} \cdot (invest + E_{exist}) \cdot s_{flex, up} \cdot L \cdot \Delta t \quad \forall t \in \mathbb{T} \\ & (10) \quad \sum_{tt=t}^{t+R-1} DSM_{tt}^{do, shed} \leq E_{t}^{do} \cdot (invest + E_{exist}) \cdot s_{flex, do} \cdot t_{shed} \cdot \Delta t \quad \forall t \in \mathbb{T} \\$

Note: For the sake of readability, the handling of indices is not displayed here. E.g. evaluating a variable for t-L may lead to a negative and therefore infeasible index. This is addressed by limiting the sums to non-negative indices within the model index bounds. Please refer to the constraints implementation themselves.

The following parts of the objective function are created:

Investment annuity:

$invest \cdot costs_{invest} \\$

Variable costs:

$DSM_{t}^{up} \cdot cost_{t}^{dsm, up} + \sum_{tt=0}^{T} DSM_{t, tt}^{do, shift} \cdot cost_{t}^{dsm, do, shift} + DSM_{t}^{do, shed} \cdot cost_{t}^{dsm, do, shed} \quad \forall t \in \mathbb{T}$

Table: Symbols and attribute names of variables and parameters

Please refer to oemof.solph.custom.SinkDSMDIWBlock.

The following variables and parameters are exclusively used for investment modeling:

Variables (V) and Parameters (P)¶

symbol attribute type explanation

$invest$ invest V DSM capacity invested in. Equals to the additionally installed capacity. The capacity share eligible for a shift is determined by flex share(s).

$invest_{min}$ minimum

P minimum investment

$invest_{max}$ maximum

P maximum investment

$E_{exist}$ existing

P existing DSM capacity

$s_{flex, up}$ flex_share_up

P Share of invested capacity that may be shift upwards at maximum

$s_{flex, do}$ flex_share_do

P Share of invested capacity that may be shift downwards at maximum

$costs_{invest}$ ep_costs

P specific investment annuity

$T$ P Overall amount of time steps (cardinality)

CONSTRAINT_GROUP = True¶

class oemof.solph.custom.sink_dsm.SinkDSMDLRBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Constraints for SinkDSM with “DLR” approach

The following constraints are created for approach = ‘DLR’:

$& (1) \quad DSM_{h, t}^{up} = 0 \quad \forall h \in H_{DR} \forall t \in \mathbb{T} \quad if \space eligibility_{shift} = False \\ & (2) \quad DSM_{t}^{do, shed} = 0 \quad \forall t \in \mathbb{T} \quad if \space eligibility_{shed} = False \\ & (3) \quad \dot{E}_{t} = demand_{t} \cdot demand_{max} + \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo} - DSM_{h, t}^{do, shift} - DSM_{h, t}^{balanceUp}) - DSM_{t}^{do, shed} \quad \forall t \in \mathbb{T} \\ & (4) \quad DSM_{h, t}^{balanceDo} = \frac{DSM_{h, t - h}^{do, shift}}{\eta} \quad \forall h \in H_{DR} \forall t \in [h..T] \\ & (5) \quad DSM_{h, t}^{balanceUp} = DSM_{h, t-h}^{up} \cdot \eta \quad \forall h \in H_{DR} \forall t \in [h..T] \\ & (6) \quad DSM_{h, t}^{do, shift} = 0 \quad \forall h \in H_{DR} \forall t \in [T - h..T] \\ & (7) \quad DSM_{h, t}^{up} = 0 \quad \forall h \in H_{DR} \forall t \in [T - h..T] \\ & (8) \quad \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{do, shift} + DSM_{h, t}^{balanceUp}) + DSM_{t}^{do, shed} \leq E_{t}^{do} \cdot E_{max, do} \quad \forall t \in \mathbb{T} \\ & (9) \quad \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo}) \leq E_{t}^{up} \cdot E_{max, up} \quad \forall t \in \mathbb{T} \\ & (10) \quad \Delta t \cdot \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{do, shift} - DSM_{h, t}^{balanceDo} \cdot \eta) = W_{t}^{levelDo} - W_{t-1}^{levelDo} \quad \forall t \in [1..T] \\ & (11) \quad \Delta t \cdot \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} \cdot \eta - DSM_{h, t}^{balanceUp}) = W_{t}^{levelUp} - W_{t-1}^{levelUp} \quad \forall t \in [1..T] \\ & (12) \quad W_{t}^{levelDo} \leq \overline{E}_{t}^{do} \cdot E_{max, do} \cdot t_{shift} \quad \forall t \in \mathbb{T} \\ & (13) \quad W_{t}^{levelUp} \leq \overline{E}_{t}^{up} \cdot E_{max, up} \cdot t_{shift} \quad \forall t \in \mathbb{T} \\ & (14) \quad \displaystyle\sum_{t=0}^{T} DSM_{t}^{do, shed} \leq E_{max, do} \cdot \overline{E}_{t}^{do} \cdot t_{shed} \cdot n^{yearLimitShed} \\ & (15) \quad \displaystyle\sum_{t=0}^{T} \sum_{h=1}^{H_{DR}} DSM_{h, t}^{do, shift} \leq E_{max, do} \cdot \overline{E}_{t}^{do} \cdot t_{shift} \cdot n^{yearLimitShift} \\ (optional \space constraint) \\ & (16) \quad \displaystyle\sum_{t=0}^{T} \sum_{h=1}^{H_{DR}} DSM_{h, t}^{up} \leq E_{max, up} \cdot \overline{E}_{t}^{up} \cdot t_{shift} \cdot n^{yearLimitShift} \\ (optional \space constraint) \\ & (17) \quad \displaystyle\sum_{h=1}^{H_{DR}} DSM_{h, t}^{do, shift} \leq E_{max, do} \cdot \overline{E}_{t}^{do} \cdot t_{shift} - \displaystyle\sum_{t'=1}^{t_{dayLimit}} \sum_{h=1}^{H_{DR}} DSM_{h, t - t'}^{do, shift} \quad \forall t \in [t-t_{dayLimit}..T] \\ (optional \space constraint) \\ & (18) \quad \displaystyle\sum_{h=1}^{H_{DR}} DSM_{h, t}^{up} \leq E_{max, up} \cdot \overline{E}_{t}^{up} \cdot t_{shift} - \displaystyle\sum_{t'=1}^{t_{dayLimit}} \sum_{h=1}^{H_{DR}} DSM_{h, t - t'}^{up} \quad \forall t \in [t-t_{dayLimit}..T] \\ (optional \space constraint) \\ & (19) \quad \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo} + DSM_{h, t}^{do, shift} + DSM_{h, t}^{balanceUp}) + DSM_{t}^{do, shed} \leq \max \{E_{t}^{up} \cdot E_{max, up}, E_{t}^{do} \cdot E_{max, do} \} \quad \forall t \in \mathbb{T} \\ (optional \space constraint) \\ &$

Note: For the sake of readability, the handling of indices is not displayed here. E.g. evaluating a variable for t-L may lead to a negative and therefore infeasible index. This is addressed by limiting the sums to non-negative indices within the model index bounds. Please refer to the constraints implementation themselves.

The following parts of the objective function are created:

$\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo}) \cdot cost_{t}^{dsm, up} + \sum_{h=1}^{H_{DR}} (DSM_{h, t}^{do, shift} + DSM_{h, t}^{balanceUp}) \cdot cost_{t}^{dsm, do, shift} + DSM_{t}^{do, shed} \cdot cost_{t}^{dsm, do, shed} \quad \forall t \in \mathbb{T} \\$

Table: Symbols and attribute names of variables and parameters

Variables (V) and Parameters (P)¶

symbol attribute type explanation

$DSM_{h, t}^{up}$ dsm_up[g,h,t]

V DSM up shift (additional load) in hour t with delay time h

$DSM_{h, t}^{do, shift}$

dsm_do_shift[g,h, t]

V DSM down shift (less load) in hour t with delay time h

$DSM_{h, t}^{balanceUp}$

balance_dsm_up[g,h,t]

V DSM down shift (less load) in hour t with delay time h to balance previous upshift

$DSM_{h, t}^{balanceDo}$

balance_dsm_do[g,h,t]

V DSM up shift (additional load) in hour t with delay time h to balance previous downshift

$DSM_{t}^{do, shed}$

dsm_do_shed[g, t]

V DSM shedded (capacity shedded, i.e. not compensated for)

$\dot{E}_{t}$ flow[g,t] V Energy flowing in from (electrical) inflow bus

$h$ element of delay_time P

delay time for load shift (integer value from set of feasible delay times per DSM portfolio) (time until the energy balance has to be levelled out again; roundtrip time of one load shifting cycle, i.e. time window for upshift and compensating downshift)

$H_{DR}$

range(length(:attr:`~SinkDSM.delay_time) + 1)`

P Set of feasible delay times for load shift of a certain DSM portfolio (time until the energy balance has to be levelled out again; roundtrip time of one load shifting cycle, i.e. time window for upshift and compensating downshift)

$t_{shift}$ shift_time P

Maximum time for a shift in one direction, i. e. maximum time for an upshift or a downshift in a load shifting cycle

$t_{she}$ shed_time P

Maximum time for one load shedding process

$demand_{t}$ demand[t] P

(Electrical) demand series (normalized)

$demand_{max}$ max_demand P

Maximum demand value

$E_{t}^{do}$ capacity_down[t] P

Capacity allowed for a load adjustment downwards (normalized) (DSM down shift + DSM shedded)

$E_{t}^{up}$ capacity_up[t] P

Capacity allowed for a shift upwards (normalized) (DSM up shift)

$E_{do, max}$ max_capacity_down P

Maximum capacity allowed for a load adjustment downwards (DSM down shift + DSM shedded)

$E_{up, max}$ max_capacity_up P

Capacity allowed for a shift upwards (normalized) (DSM up shift)

$\eta$ efficiency P Efficiency loss for load shifting processes

$\mathbb{T}$ P Set of time steps

$T$ P Overall amount of time steps (cardinality)

$eligibility_{shift}$

shift_eligibility P

Boolean parameter indicating if unit can be used for load shifting

$eligibility_{shed}$

shed_eligibility P

Boolean parameter indicating if unit can be used for load shedding

$cost_{t}^{dsm, up}$ cost_dsm_up[t]

P Variable costs for an upwards shift

$cost_{t}^{dsm, do, shift}$

cost_dsm_down_shift[t] P

Variable costs for a downwards shift (load shifting)

$cost_{t}^{dsm, do, shed}$

cost_dsm_down_shed[t] P

Variable costs for shedding load

$\Delta t$ timeincrement P

The time increment of the model

$n_{yearLimitshift}$ n_yearLimitShift

P Maximum allowed number of load shifts (at full capacity) in the optimization timeframe

$n_{yearLimitshed}$ n_yearLimitShed

P Maximum allowed number of load sheds (at full capacity) in the optimization timeframe

$t_{dayLimit}$ t_dayLimit

P Maximum duration of load shifts at full capacity per day resp. in the last hours before the current

CONSTRAINT_GROUP = True¶

class oemof.solph.custom.sink_dsm.SinkDSMDLRInvestmentBlock(*args, **kwargs)[source]¶

Bases: oemof.solph.custom.sink_dsm.SinkDSMDLRBlock

Constraints for SinkDSM with “DLR” approach and investment

The following constraints are created for approach = ‘DLR’ with an investment object defined:

$& (1) \quad invest_{min} \leq invest \leq invest_{max} \\ & (2) \quad DSM_{h, t}^{up} = 0 \quad \forall h \in H_{DR} \forall t \in \mathbb{T} \quad if \space eligibility_{shift} = False \\ & (3) \quad DSM_{t}^{do, shed} = 0 \quad \forall t \in \mathbb{T} \quad if \space eligibility_{shed} = False \\ & (4) \quad \dot{E}_{t} = demand_{t} \cdot (invest + E_{exist}) + \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo} - DSM_{h, t}^{do, shift} - DSM_{h, t}^{balanceUp}) - DSM_{t}^{do, shed} \quad \forall t \in \mathbb{T} \\ & (5) \quad DSM_{h, t}^{balanceDo} = \frac{DSM_{h, t - h}^{do, shift}}{\eta} \quad \forall h \in H_{DR} \forall t \in [h..T] \\ & (6) \quad DSM_{h, t}^{balanceUp} = DSM_{h, t-h}^{up} \cdot \eta \quad \forall h \in H_{DR} \forall t \in [h..T] \\ & (7) \quad DSM_{h, t}^{do, shift} = 0 \quad \forall h \in H_{DR} \forall t \in [T - h..T] \\ & (8) \quad DSM_{h, t}^{up} = 0 \quad \forall h \in H_{DR} \forall t \in [T - h..T] \\ & (9) \quad \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{do, shift} + DSM_{h, t}^{balanceUp}) + DSM_{t}^{do, shed} \leq E_{t}^{do} \cdot (invest + E_{exist}) \cdot s_{flex, do} \quad \forall t \in \mathbb{T} \\ & (10) \quad \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo}) \leq E_{t}^{up} \cdot (invest + E_{exist}) \cdot s_{flex, up} \quad \forall t \in \mathbb{T} \\ & (11) \quad \Delta t \cdot \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{do, shift} - DSM_{h, t}^{balanceDo} \cdot \eta) = W_{t}^{levelDo} - W_{t-1}^{levelDo} \quad \forall t \in [1..T] \\ & (12) \quad \Delta t \cdot \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} \cdot \eta - DSM_{h, t}^{balanceUp}) = W_{t}^{levelUp} - W_{t-1}^{levelUp} \quad \forall t \in [1..T] \\ & (13) \quad W_{t}^{levelDo} \leq \overline{E}_{t}^{do} \cdot (invest + E_{exist}) \cdot s_{flex, do} \cdot t_{shift} \quad \forall t \in \mathbb{T} \\ & (14) \quad W_{t}^{levelUp} \leq \overline{E}_{t}^{up} \cdot (invest + E_{exist}) \cdot s_{flex, up} \cdot t_{shift} \quad \forall t \in \mathbb{T} \\ & (15) \quad \displaystyle\sum_{t=0}^{T} DSM_{t}^{do, shed} \leq (invest + E_{exist}) \cdot s_{flex, do} \cdot \overline{E}_{t}^{do} \cdot t_{shed} \cdot n^{yearLimitShed} \\ & (16) \quad \displaystyle\sum_{t=0}^{T} \sum_{h=1}^{H_{DR}} DSM_{h, t}^{do, shift} \leq (invest + E_{exist}) \cdot s_{flex, do} \cdot \overline{E}_{t}^{do} \cdot t_{shift} \cdot n^{yearLimitShift} \\ (optional \space constraint) \\ & (17) \quad \displaystyle\sum_{t=0}^{T} \sum_{h=1}^{H_{DR}} DSM_{h, t}^{up} \leq (invest + E_{exist}) \cdot s_{flex, up} \cdot \overline{E}_{t}^{up} \cdot t_{shift} \cdot n^{yearLimitShift} \\ (optional \space constraint) \\ & (18) \quad \displaystyle\sum_{h=1}^{H_{DR}} DSM_{h, t}^{do, shift} \leq (invest + E_{exist}) \cdot s_{flex, do} \cdot \overline{E}_{t}^{do} \cdot t_{shift} - \displaystyle\sum_{t'=1}^{t_{dayLimit}} \sum_{h=1}^{H_{DR}} DSM_{h, t - t'}^{do, shift} \quad \forall t \in [t-t_{dayLimit}..T] \\ (optional \space constraint) \\ & (19) \quad \displaystyle\sum_{h=1}^{H_{DR}} DSM_{h, t}^{up} \leq (invest + E_{exist}) \cdot s_{flex, up} \cdot \overline{E}_{t}^{up} \cdot t_{shift} - \displaystyle\sum_{t'=1}^{t_{dayLimit}} \sum_{h=1}^{H_{DR}} DSM_{h, t - t'}^{up} \quad \forall t \in [t-t_{dayLimit}..T] \\ (optional \space constraint) \\ & (20) \quad \displaystyle\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo} + DSM_{h, t}^{do, shift} + DSM_{h, t}^{balanceUp}) + DSM_{t}^{shed} \leq \max \{E_{t}^{up} \cdot s_{flex, up}, E_{t}^{do} \cdot s_{flex, do} \} \cdot (invest + E_{exist}) \quad \forall t \in \mathbb{T} \\ (optional \space constraint) \\ &$

Note: For the sake of readability, the handling of indices is not displayed here. E.g. evaluating a variable for t-L may lead to a negative and therefore infeasible index. This is addressed by limiting the sums to non-negative indices within the model index bounds. Please refer to the constraints implementation themselves.

The following parts of the objective function are created:

Investment annuity:

$invest \cdot costs_{invest} \\$

Variable costs:

$\sum_{h=1}^{H_{DR}} (DSM_{h, t}^{up} + DSM_{h, t}^{balanceDo}) \cdot cost_{t}^{dsm, up} + \sum_{h=1}^{H_{DR}} (DSM_{h, t}^{do, shift} + DSM_{h, t}^{balanceUp}) \cdot cost_{t}^{dsm, do, shift} + DSM_{t}^{do, shed} \cdot cost_{t}^{dsm, do, shed} \quad \forall t \in \mathbb{T} \\$

Table: Symbols and attribute names of variables and parameters

Please refer to oemof.solph.custom.SinkDSMDLRBlock.

The following variables and parameters are exclusively used for investment modeling:

Variables (V) and Parameters (P)¶

symbol attribute type explanation

$invest$ invest V DSM capacity invested in. Equals to the additionally installed capacity. The capacity share eligible for a shift is determined by flex share(s).

$invest_{min}$ minimum

P minimum investment

$invest_{max}$ maximum

P maximum investment

$E_{exist}$ existing

P existing DSM capacity

$s_{flex, up}$ flex_share_up

P Share of invested capacity that may be shift upwards at maximum

$s_{flex, do}$ flex_share_do

P Share of invested capacity that may be shift downwards at maximum

$costs_{invest}$ ep_costs

P specific investment annuity

CONSTRAINT_GROUP = True¶

class oemof.solph.custom.sink_dsm.SinkDSMOemofBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Constraints for SinkDSM with “oemof” approach

The following constraints are created for approach = ‘oemof’:

$& (1) \quad DSM_{t}^{up} = 0 \quad \forall t \quad if \space eligibility_{shift} = False \\ & (2) \quad DSM_{t}^{do, shed} = 0 \quad \forall t \quad if \space eligibility_{shed} = False \\ & (3) \quad \dot{E}_{t} = demand_{t} \cdot demand_{max} + DSM_{t}^{up} - DSM_{t}^{do, shift} - DSM_{t}^{do, shed} \quad \forall t \in \mathbb{T} \\ & (4) \quad DSM_{t}^{up} \leq E_{t}^{up} \cdot E_{up, max} \quad \forall t \in \mathbb{T} \\ & (5) \quad DSM_{t}^{do, shift} + DSM_{t}^{do, shed} \leq E_{t}^{do} \cdot E_{do, max} \quad \forall t \in \mathbb{T} \\ & (6) \quad \sum_{t=t_s}^{t_s+\tau} DSM_{t}^{up} \cdot \eta = \sum_{t=t_s}^{t_s+\tau} DSM_{t}^{do, shift} \quad \forall t_s \in \{k \in \mathbb{T} \mid k \mod \tau = 0\} \\ &$

The following parts of the objective function are created:

$DSM_{t}^{up} \cdot cost_{t}^{dsm, up} + DSM_{t}^{do, shift} \cdot cost_{t}^{dsm, do, shift} + DSM_{t}^{do, shed} \cdot cost_{t}^{dsm, do, shed} \quad \forall t \in \mathbb{T} \\$

Table: Symbols and attribute names of variables and parameters

Variables (V) and Parameters (P)¶

symbol attribute type explanation

$DSM_{t}^{up}$

dsm_up[g, t] V DSM up shift (capacity shifted upwards)

$DSM_{t}^{do, shift}$

dsm_do_shift[g, t]

V DSM down shift (capacity shifted downwards)

$DSM_{t}^{do, shed}$

dsm_do_shed[g, t]

V DSM shedded (capacity shedded, i.e. not compensated for)

$\dot{E}_{t}$ inputs V Energy flowing in from (electrical) inflow bus

$demand_{t}$ demand[t] P

(Electrical) demand series (normalized)

$demand_{max}$ max_demand P

Maximum demand value

$E_{t}^{do}$ capacity_down[t] P

Capacity allowed for a load adjustment downwards (normalized) (DSM down shift + DSM shedded)

$E_{t}^{up}$ capacity_up[t] P

Capacity allowed for a shift upwards (normalized) (DSM up shift)

$E_{do, max}$ max_capacity_down P

Maximum capacity allowed for a load adjustment downwards (DSM down shift + DSM shedded)

$E_{up, max}$ max_capacity_up P

Capacity allowed for a shift upwards (normalized) (DSM up shift)

$\tau$ shift_interval P Shift interval (time within which the energy balance must be levelled out

$\eta$ efficiency P Efficiency loss forload shifting processes

$\mathbb{T}$ P Time steps

$eligibility_{shift}$

shift_eligibility P

Boolean parameter indicating if unit can be used for load shifting

$eligibility_{shed}$

shed_eligibility P

Boolean parameter indicating if unit can be used for load shedding

$cost_{t}^{dsm, up}$ cost_dsm_up[t]

P Variable costs for an upwards shift

$cost_{t}^{dsm, do, shift}$

cost_dsm_down_shift[t] P

Variable costs for a downwards shift (load shifting)

$cost_{t}^{dsm, do, shed}$

cost_dsm_down_shed[t] P

Variable costs for shedding load

CONSTRAINT_GROUP = True¶

class oemof.solph.custom.sink_dsm.SinkDSMOemofInvestmentBlock(*args, **kwargs)[source]¶

Bases: pyomo.core.base.block.SimpleBlock

Constraints for SinkDSM with “oemof” approach and investment

The following constraints are created for approach = ‘oemof’ with an investment object defined:

$& (1) \quad invest_{min} \leq invest \leq invest_{max} \\ & (2) \quad DSM_{t}^{up} = 0 \quad \forall t \quad if \space eligibility_{shift} = False \\ & (3) \quad DSM_{t}^{do, shed} = 0 \quad \forall t \quad if \space eligibility_{shed} = False \\ & (4) \quad \dot{E}_{t} = demand_{t} \cdot (invest + E_{exist}) + DSM_{t}^{up} - DSM_{t}^{do, shift} - DSM_{t}^{do, shed} \quad \forall t \in \mathbb{T} \\ & (5) \quad DSM_{t}^{up} \leq E_{t}^{up} \cdot (invest + E_{exist}) \cdot s_{flex, up} \quad \forall t \in \mathbb{T} \\ & (6) \quad DSM_{t}^{do, shift} + DSM_{t}^{do, shed} \leq E_{t}^{do} \cdot (invest + E_{exist}) \cdot s_{flex, do} \quad \forall t \in \mathbb{T} \\ & (7) \quad \sum_{t=t_s}^{t_s+\tau} DSM_{t}^{up} \cdot \eta = \sum_{t=t_s}^{t_s+\tau} DSM_{t}^{do, shift} \quad \forall t_s \in \{k \in \mathbb{T} \mid k \mod \tau = 0\} \\ &$

The following parts of the objective function are created:

Investment annuity:

$invest \cdot costs_{invest} \\$

Variable costs:

$DSM_{t}^{up} \cdot cost_{t}^{dsm, up} + DSM_{t}^{do, shift} \cdot cost_{t}^{dsm, do, shift} + DSM_{t}^{do, shed} \cdot cost_{t}^{dsm, do, shed} \quad \forall t \in \mathbb{T} \\$

See remarks in oemof.solph.custom.SinkDSMOemofBlock.

Symbols and attribute names of variables and parameters

Please refer to oemof.solph.custom.SinkDSMOemofBlock.

The following variables and parameters are exclusively used for investment modeling:

Variables (V) and Parameters (P)¶

symbol attribute type explanation

$invest$ invest V DSM capacity invested in. Equals to the additionally installed capacity. The capacity share eligible for a shift is determined by flex share(s).

$invest_{min}$ minimum

P minimum investment

$invest_{max}$ maximum

P maximum investment

$E_{exist}$ existing

P existing DSM capacity

$s_{flex, up}$ flex_share_up

P Share of invested capacity that may be shift upwards at maximum

$s_{flex, do}$ flex_share_do

P Share of invested capacity that may be shift downwards at maximum

$costs_{invest}$ epcosts

P specific investment annuity

CONSTRAINT_GROUP = True¶

oemof.solph.groupings module¶

Groupings needed on an energy system for it to work with solph.

If you want to use solph on an energy system, you need to create it with these groupings specified like this:

from oemof.network import EnergySystem import solph

energy_system = EnergySystem(groupings=solph.GROUPINGS)

oemof.solph.groupings.constraint_grouping(node, fallback=<function <lambda>>)[source]¶

Grouping function for constraints.

This function can be passed in a list to groupings of oemof.solph.network.EnergySystem.

Parameters:	node (`Node <oemof.network.Node`) – The node for which the figure out a constraint group. fallback (callable, optional) – A function of one argument. If node doesn’t have a constraint_group attribute, this is used to group the node instead. Defaults to not group the node at all.

oemof.solph.helpers module¶

This is a collection of helper functions which work on their own and can be used by various classes. If there are too many helper-functions, they will be sorted in different modules.

oemof.solph.helpers.calculate_timeincrement(timeindex, fill_value=None)[source]¶

Calculates timeincrement for timeindex

Parameters:	timeindex (pd.DatetimeIndex) – timeindex of energysystem fill_value (numerical) – timeincrement for first timestep in hours

oemof.solph.helpers.extend_basic_path(subfolder)[source]¶: Returns a path based on the basic oemof path and creates it if necessary. The subfolder is the name of the path extension.

oemof.solph.helpers.flatten(d, parent_key='', sep='_')[source]¶

Flatten dictionary by compressing keys.

See: https://stackoverflow.com/questions/6027558/: flatten-nested-python-dictionaries-compressing-keys

d : dictionary sep : separator for flattening keys

Returns:	dict

oemof.solph.helpers.get_basic_path()[source]¶: Returns the basic oemof path and creates it if necessary. The basic path is the ‘.oemof’ folder in the $HOME directory.

oemof.solph.models module¶

Solph Optimization Models.

class oemof.solph.models.BaseModel(energysystem, **kwargs)[source]¶

Bases: pyomo.core.base.PyomoModel.ConcreteModel

The BaseModel for other solph-models (Model, MultiPeriodModel, etc.)

Parameters:

energysystem (EnergySystem object) – Object that holds the nodes of an oemof energy system graph
constraint_groups (list (optional)) – Solph looks for these groups in the given energy system and uses them to create the constraints of the optimization problem. Defaults to Model.CONSTRAINTS
objective_weighting (array like (optional)) – Weights used for temporal objective function expressions. If nothing is passed timeincrement will be used which is calculated from the freq length of the energy system timeindex .
auto_construct (boolean) – If this value is true, the set, variables, constraints, etc. are added, automatically when instantiating the model. For sequential model building process set this value to False and use methods _add_parent_block_sets, _add_parent_block_variables, _add_blocks, _add_objective
Attributes
———–
timeincrement (sequence) – Time increments.
flows (dict) – Flows of the model.
name (str) – Name of the model.
es (solph.EnergySystem) – Energy system of the model.
meta (pyomo.opt.results.results_.SolverResults or None) – Solver results.
dual (… or None)
rc (… or None)

CONSTRAINT_GROUPS = []¶

receive_duals()[source]¶: Method sets solver suffix to extract information about dual variables from solver. Shadow prices (duals) and reduced costs (rc) are set as attributes of the model.

relax_problem()[source]¶: Relaxes integer variables to reals of optimization model self.

results()[source]¶: Returns a nested dictionary of the results of this optimization

solve(solver='cbc', solver_io='lp', **kwargs)[source]¶

Takes care of communication with solver to solve the model.

Other Parameters:
Parameters:	solver (string) – solver to be used e.g. “glpk”,”gurobi”,”cplex” solver_io (string) – pyomo solver interface file format: “lp”,”python”,”nl”, etc. *kwargs (keyword arguments*) – Possible keys can be set see below:
	solve_kwargs (dict) – Other arguments for the pyomo.opt.SolverFactory.solve() method Example : {“tee”:True} cmdline_options (dict) – Dictionary with command line options for solver e.g. {“mipgap”:”0.01”} results in “–mipgap 0.01” {“interior”:” “} results in “–interior” Gurobi solver takes numeric parameter values such as {“method”: 2}

class oemof.solph.models.Model(energysystem, **kwargs)[source]¶

Bases: oemof.solph.models.BaseModel

An energy system model for operational and investment optimization.

Parameters:

energysystem (EnergySystem object) – Object that holds the nodes of an oemof energy system graph
constraint_groups (list) – Solph looks for these groups in the given energy system and uses them to create the constraints of the optimization problem. Defaults to Model.CONSTRAINTS
**The following basic sets are created**
NODES – A set with all nodes of the given energy system.
TIMESTEPS – A set with all timesteps of the given time horizon.
FLOWS – A 2 dimensional set with all flows. Index: (source, target)
**The following basic variables are created**
flow – Flow from source to target indexed by FLOWS, TIMESTEPS. Note: Bounds of this variable are set depending on attributes of the corresponding flow object.

CONSTRAINT_GROUPS = [<class 'oemof.solph.blocks.bus.Bus'>, <class 'oemof.solph.blocks.transformer.Transformer'>, <class 'oemof.solph.blocks.investment_flow.InvestmentFlow'>, <class 'oemof.solph.blocks.flow.Flow'>, <class 'oemof.solph.blocks.non_convex_flow.NonConvexFlow'>]¶

oemof.solph.network module¶

Classes used to model energy supply systems within solph.

Classes are derived from oemof core network classes and adapted for specific optimization tasks. An energy system is modelled as a graph/network of nodes with very specific constraints on which types of nodes are allowed to be connected.

oemof.solph.options module¶

Optional classes to be added to a network class.

class oemof.solph.options.Investment(maximum=inf, minimum=0, ep_costs=0, existing=0, nonconvex=False, offset=0, **kwargs)[source]¶

Bases: object

Parameters:

maximum (float, $P_{invest,max}$ or $E_{invest,max}$ ) – Maximum of the additional invested capacity
minimum (float, $P_{invest,min}$ or $E_{invest,min}$ ) – Minimum of the additional invested capacity. If nonconvex is True, minimum defines the threshold for the invested capacity.
ep_costs (float, $c_{invest,var}$ ) – Equivalent periodical costs for the investment per flow capacity.
existing (float, $P_{exist}$ or $E_{exist}$ ) – Existing / installed capacity. The invested capacity is added on top of this value. Not applicable if nonconvex is set to True.
nonconvex (bool) – If True, a binary variable for the status of the investment is created. This enables additional fix investment costs (offset) independent of the invested flow capacity. Therefore, use the offset parameter.
offset (float, $c_{invest,fix}$ ) – Additional fix investment costs. Only applicable if nonconvex is set to True.

For the variables, constraints and parts of the objective function, which are created, see oemof.solph.blocks.investment_flow.InvestmentFlow and oemof.solph.components.generic_storage.GenericInvestmentStorageBlock.

class oemof.solph.options.NonConvex(**kwargs)[source]¶

Bases: object

Parameters:

startup_costs (numeric (iterable or scalar)) – Costs associated with a start of the flow (representing a unit).
shutdown_costs (numeric (iterable or scalar)) – Costs associated with the shutdown of the flow (representing a unit).
activity_costs (numeric (iterable or scalar)) – Costs associated with the active operation of the flow, independently from the actual output.
minimum_uptime (numeric (1 or positive integer)) – Minimum time that a flow must be greater then its minimum flow after startup. Be aware that minimum up and downtimes can contradict each other and may lead to infeasible problems.
minimum_downtime (numeric (1 or positive integer)) – Minimum time a flow is forced to zero after shutting down. Be aware that minimum up and downtimes can contradict each other and may to infeasible problems.
maximum_startups (numeric (0 or positive integer)) – Maximum number of start-ups.
maximum_shutdowns (numeric (0 or positive integer)) – Maximum number of shutdowns.
initial_status (numeric (0 or 1)) – Integer value indicating the status of the flow in the first time step (0 = off, 1 = on). For minimum up and downtimes, the initial status is set for the respective values in the edge regions e.g. if a minimum uptime of four timesteps is defined, the initial status is fixed for the four first and last timesteps of the optimization period. If both, up and downtimes are defined, the initial status is set for the maximum of both e.g. for six timesteps if a minimum downtime of six timesteps is defined in addition to a four timestep minimum uptime.
positive_gradient (dict, default: {‘ub’: None, ‘costs’: 0}) –

A dictionary containing the following two keys:
- ‘ub’: numeric (iterable, scalar or None), the normed upper bound on the positive difference (flow[t-1] < flow[t]) of two consecutive flow values.
- ‘costs`: numeric (scalar or None), the gradient cost per unit.
negative_gradient (dict, default: {‘ub’: None, ‘costs’: 0}) –

A dictionary containing the following two keys:
- ‘ub’: numeric (iterable, scalar or None), the normed upper bound on the negative difference (flow[t-1] > flow[t]) of two consecutive flow values.
- ‘costs`: numeric (scalar or None), the gradient cost per unit.

max_up_down¶: Compute or return the _max_up_down attribute.

oemof.solph.plumbing module¶

Plumbing stuff.

oemof.solph.plumbing.sequence(iterable_or_scalar)[source]¶

Tests if an object is iterable (except string) or scalar and returns a the original sequence if object is an iterable and a ‘emulated’ sequence object of class _Sequence if object is a scalar or string.

Parameters:	iterable_or_scalar (iterable or None or int or float)

Examples

>>> sequence([1,2])
[1, 2]

>>> x = sequence(10)
>>> x[0]
10

>>> x[10]
10
>>> print(x)
[10, 10, 10, 10, 10, 10, 10, 10, 10, 10, 10]

oemof.solph.processing module¶

Modules for providing a convenient data structure for solph results.

Information about the possible usage is provided within the examples.

oemof.solph.processing.convert_keys_to_strings(result, keep_none_type=False)[source]¶

Convert the dictionary keys to strings.

All (tuple) keys of the result object e.g. results[(pp1, bus1)] are converted into strings that represent the object labels e.g. results[(‘pp1’,’bus1’)].

oemof.solph.processing.create_dataframe(om)[source]¶

Create a result dataframe with all optimization data.

Results from Pyomo are written into pandas DataFrame where separate columns are created for the variable index e.g. for tuples of the flows and components or the timesteps.

oemof.solph.processing.get_timestep(x)[source]¶

Get the timestep from oemof tuples.

The timestep from tuples (n, n, int), (n, n), (n, int) and (n,) is fetched as the last element. For time-independent data (scalars) zero ist returned.

oemof.solph.processing.get_tuple(x)[source]¶

Get oemof tuple within iterable or create it.

Tuples from Pyomo are of type (n, n, int), (n, n) and (n, int). For single nodes n a tuple with one object (n,) is created.

oemof.solph.processing.meta_results(om, undefined=False)[source]¶

Fetch some meta data from the Solver. Feel free to add more keys.

Valid keys of the resulting dictionary are: ‘objective’, ‘problem’, ‘solver’.

om : oemof.solph.Model: A solved Model.
undefined : bool: By default (False) only defined keys can be found in the dictionary. Set to True to get also the undefined keys.

Returns:	dict

oemof.solph.processing.parameter_as_dict(system, exclude_none=True)[source]¶

Create a result dictionary containing node parameters.

Results are written into a dictionary of pandas objects where a Series holds all scalar values and a dataframe all sequences for nodes and flows. The dictionary is keyed by flows (n, n) and nodes (n, None), e.g. parameter[(n, n)][‘sequences’] or parameter[(n, n)][‘scalars’].

Parameters:	system (energy_system.EnergySystem) – A populated energy system. exclude_none (bool) – If True, all scalars and sequences containing None values are excluded
Returns:	dict (Parameters for all nodes and flows)

oemof.solph.processing.remove_timestep(x)[source]¶

Remove the timestep from oemof tuples.

The timestep is removed from tuples of type (n, n, int) and (n, int).

oemof.solph.processing.results(om)[source]¶

Create a result dictionary from the result DataFrame.

Results from Pyomo are written into a dictionary of pandas objects where a Series holds all scalar values and a dataframe all sequences for nodes and flows. The dictionary is keyed by the nodes e.g. results[idx][‘scalars’] and flows e.g. results[n, n][‘sequences’].

oemof.solph.views module¶

Modules for providing convenient views for solph results.

Information about the possible usage is provided within the examples.

class oemof.solph.views.NodeOption[source]¶

Bases: str, enum.Enum

An enumeration.

All = 'all'¶

HasInputs = 'has_inputs'¶

HasOnlyInputs = 'has_only_inputs'¶

HasOnlyOutputs = 'has_only_outputs'¶

HasOutputs = 'has_outputs'¶

oemof.solph.views.convert_to_multiindex(group, index_names=None, droplevel=None)[source]¶

Convert dict to pandas DataFrame with multiindex

Parameters:	group (dict) – Sequences of the oemof.solph.Model.results dictionary index_names (arraylike) – Array with names of the MultiIndex droplevel (arraylike) – List containing levels to be dropped from the dataframe

oemof.solph.views.filter_nodes(results, option=<NodeOption.All: 'all'>, exclude_busses=False)[source]¶

Get set of nodes from results-dict for given node option.

This function filters nodes from results for special needs. At the moment, the following options are available:

NodeOption.All: ‘all’: Returns all nodes

NodeOption.HasOutputs: ‘has_outputs’:

Returns nodes with an output flow (eg. Transformer, Source)

NodeOption.HasInputs: ‘has_inputs’:

Returns nodes with an input flow (eg. Transformer, Sink)

NodeOption.HasOnlyOutputs: ‘has_only_outputs’:

Returns nodes having only output flows (eg. Source)

NodeOption.HasOnlyInputs: ‘has_only_inputs’:

Returns nodes having only input flows (eg. Sink)

Additionally, busses can be excluded by setting exclude_busses to True.

Parameters:	results (dict) option (NodeOption) exclude_busses (bool) – If set, all bus nodes are excluded from the resulting node set.
Returns:	`set` – A set of Nodes.

oemof.solph.views.get_node_by_name(results, *names)[source]¶

Searches results for nodes

Names are looked up in nodes from results and either returned single node (in case only one name is given) or as list of nodes. If name is not found, None is returned.

oemof.solph.views.net_storage_flow(results, node_type)[source]¶

Calculates the net storage flow for storage models that have one input edge and one output edge both with flows within the domain of non-negative reals.

Parameters:

results (dict) – A result dictionary from a solved oemof.solph.Model object
node_type (oemof.solph class) – Specifies the type for which (storage) type net flows are calculated

Returns:

pandas.DataFrame object with multiindex colums. Names of levels of columns
are (from, to, net_flow.)

Examples

import oemof.solph as solph from oemof.outputlib import views

# solve oemof solph model ‘m’ # Then collect node weights views.net_storage_flow(m.results(), node_type=solph.GenericStorage)

oemof.solph.views.node(results, node, multiindex=False, keep_none_type=False)[source]¶

Obtain results for a single node e.g. a Bus or Component.

Either a node or its label string can be passed. Results are written into a dictionary which is keyed by ‘scalars’ and ‘sequences’ holding respective data in a pandas Series and DataFrame.

oemof.solph.views.node_input_by_type(results, node_type, droplevel=None)[source]¶

Gets all inputs for all nodes of the type node_type and returns a dataframe.

Parameters:	results (dict) – A result dictionary from a solved oemof.solph.Model object node_type (oemof.solph class) – Specifies the type of the node for that inputs are selected droplevel (list)

Notes

from oemof import solph from oemof.outputlib import views

# solve oemof solph model ‘m’ # Then collect node weights views.node_input_by_type(m.results(), node_type=solph.Sink)

oemof.solph.views.node_output_by_type(results, node_type, droplevel=None)[source]¶

Gets all outputs for all nodes of the type node_type and returns a dataframe.

Parameters:	results (dict) – A result dictionary from a solved oemof.solph.Model object node_type (oemof.solph class) – Specifies the type of the node for that outputs are selected droplevel (list)

Notes

import oemof.solph as solph from oemof.outputlib import views

# solve oemof solph model ‘m’ # Then collect node weights views.node_output_by_type(m.results(), node_type=solph.Transformer)

oemof.solph.views.node_weight_by_type(results, node_type)[source]¶

Extracts node weights (if exist) of all components of the specified node_type.

Node weight are endogenous optimzation variables associated with the node and not the edge between two node, foxample the variable representing the storage level.

Parameters:	results (dict) – A result dictionary from a solved oemof.solph.Model object node_type (oemof.solph class) – Specifies the type for which node weights should be collected

Example

from oemof.outputlib import views

# solve oemof model ‘m’ # Then collect node weights views.node_weight_by_type(m.results(), node_type=solph.GenericStorage)

math. symbol	type	explanation
$P_n(t)$	V	power flow $n$ at time step $t$
$w_N(t)$	P	weight given to Flow named according to keyword
$\tau(t)$	P	width of time step $t$
$L$	P	global limit given by keyword limit

symbol	attribute	type	explanation
$P_{i}$	InvestmentFlow.invest[i, o]	V	installed capacity of investment flow
$w_i$	keyword	P	weight given to investment flow named according to keyword
$limit$	limit	P	global limit given by keyword limit